Hi again, Den 2015-12-05 kl. 13:27, skrev Paul Kocialkowski: > Hi, > > Le samedi 05 décembre 2015 à 00:34 +0100, Albin a écrit : >> I just found another guide >> (https://gist.github.com/jcs/4bf59314d604538a5098) that mentions a step >> that's missing on libreboot.org: besides removing the write-protect >> screw one also has to run "flashrom --wp-disable". This should explain >> the permissions issue I had. > > Can you confirm that this is the case (and that you were already using > the root account for your first report)? I didn't have to go through > this step when flashing, but maybe it is required the first time.
Yes, I was using the root account for the first report. Now I've also tried to run the command "flashrom --wp-disable" which does output "SUCCESS". That did NOT help though because, just as before, the command "./cros-flash-replace flash.img coreboot ro-frid" results in: "bash: ./cros-flash-replace: Permission denied". > > Thanks! Merci! Albin > >> Den 2015-12-04 kl. 23:49, skrev Albin: >>> Hi. >>> >>> Tonight I tried to install libreboot onto an ASOS C201. I ran into a >>> number of difficulties that I managed to overcome (see the points below, >>> my contribution to the docs), but then I got stuck at the point where >>> one is to run the cros-flash-replace script. The terminal keeps >>> returning PERMISSION DENIED. The file permissions, however, are the same >>> as just after compilation and I've also removed The Screw as instructed. >>> >>> Does anyone have a clue what might be the problem? >>> >>> Cheers, >>> >>> Albin >>> >>> >>> Errors found in the documentation: >>> >>> 1. There are *eight* screws that need to be removed to open the device, >>> not seven. There is (at least on my device) one also beneath the top >>> left pad. >>> >>> 2. You get into the TTY promt by pressing *Ctrl+Alt+Next*. >>> *Ctrl+Alt+Previous* is for exiting the promt. >>> >>> 3. The guide mentions first "cros-flash-replace" and then >>> "cros-firmware-replace": >>> >>> "Then, the cros-flash-replace script has to be executed as such: >>> # ./cros-firmware-replace flash.img coreboot ro-frid" >>> >>> By the way, shouldn't there be .img extensions after coreboot and ro-frid? >>> >> >
signature.asc
Description: OpenPGP digital signature
