https://bugs.documentfoundation.org/show_bug.cgi?id=154959
--- Comment #13 from Dr. Martinus <li...@drmartinus.de> --- I don't understand how to do bibisecting, else I would try. I know it works fine using OpenOffice, and it worked fine in LO before I switched to OpenOffice for a while which was around the end of 2023, or early 2024. Maybe you can pinpoint it with the help of this info. I played around with the settings, the preview always remains the same (i.e.portrait mode). I changed the orientation in the printer settings, save, and when I get back into the printer settings, the orientation is again in portrait mode, even though I had changed and saved it in landscape mode. The LO print dialog shows always landscape mode, probably because the document is in landscape orientation. The preview remains always in portrait orientation. I noticed that paper size changes: in LO print dialogue it is set to some other format (17x54 mm). I close the LO print dialog, open it again, the orientation says "auto", the paper size is empty. I set that to 62x100 mm, then I enter landscape mode, preview stays in portrait mode. When I then turn back to auto, the preview turns the sheet around to landscape, but the print begins somewhere to the left of the sheet, so that again the printout is cut off. I would say left margin something around -20 mm, top margin +20 mm, i.e. the print has moved downwards, the last lines are cut off. Just for info: my label printer is QL 570. -- You are receiving this mail because: You are the assignee for the bug.
