https://bugs.freedesktop.org/show_bug.cgi?id=72687
--- Comment #3 from Roberto Casini <casini...@gmail.com> --- I'm not sure what to add beyond what I've already stated in my initial comment, since all operations I listed use standard functionalities of the Draw program. The drawing of a circle and its radius are performed with the "snap to grid" option turned on, to make sure that there are no freehand positioning errors in the resulting figure. Just to make sure, I then open the Format->'Position and Size' dialogue to verify the aspect ratio of the circle (i.e., to make sure it didn't come out an ellipse) and the length of the radius. The error can then be reproduced with the following (very detailed!) steps: 1) Select the circle 2) Open the Format->'Position and Size' menu, and select the 'Position and Size' tab 3) In the 'Position' part of the tab, select the central base point of the figure, and annotate its X and Y coordinates. These are the coordinates of the circle's center 4) Close the 'Position and Size' menu 5) Back in the drawing, select the radius and make a copy of it on itself (via Ctrl-C and Ctrl-V) 6) With the radius still selected, open the Format->'Position and Size' menu, and select the 'Rotation' tab 7) Enter the coordinates of the circle center (annotated in step #3) into the Pivot Point fields 8) Enter an angle different from a multiple of 90 deg (e.g., 45 deg) in the Angle field, and click OK 9) Back in the drawing, zoom in around the region where the rotated radius should meet the circumference. The rotated radius consistently fails to reach all the way to the circumference, other than when the rotation angle is a multiple of 90 deg This bug is preserved also while exporting the drawing. I also verified that the bug is still existing in v.4.1.6.2 for Linux. -- You are receiving this mail because: You are the assignee for the bug.
_______________________________________________ Libreoffice-bugs mailing list Libreoffice-bugs@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/libreoffice-bugs
