Date: Fri, 28 Apr 2000 19:00:55 -0700
From: "Paul Davila" <[EMAIL PROTECTED]>
Subject: RE: A Few Wireless Networking Questions
I have had problems with my li50 not loading win98 with my nic installed .
after I upgraded to win98se I havn't had the same problem
Paul D. J. Davila
www.geocities.com/bronco7794
[EMAIL PROTECTED]
[EMAIL PROTECTED]
LIOR
EC4WD
EBR mailing list
LMB mailing list
Libretto mailing list
-----Original Message-----
From: Michael Van Donselaar [mailto:[EMAIL PROTECTED]]
Sent: Friday, April 28, 2000 1:41 PM
To: Libretto
Subject: Re: A Few Wireless Networking Questions
Date: Fri, 28 Apr 2000 15:31:40 -0500
From: Michael Van Donselaar <[EMAIL PROTECTED]>
Subject: Re: A Few Wireless Networking Questions
On Fri, 28 Apr 2000 12:36:03 -0700, Jim Sheafer <[EMAIL PROTECTED]>
wrote:
8<--snip
>There is even a good article about it in the current Linux Journal. The
>one gotcha that I have found is that you have to set "translate=0" instead
>of the default "1" on the linux machine to talk to winders.
One other small gotcha in my setup: the card will not always join the
network when the machine is cold booted with the card inserted. When
this happens, the card status is attempting acquisition.
Doesn't seem to be a problem if I boot w/o the card, and insert after
initialization. Has anyone else seen this?
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************
