Date: Thu, 22 Feb 2001 10:39:13
From: "neil barnes" <[EMAIL PROTECTED]>
Subject: Re: Graphics Problems with Libretto 50CT

Just on the off-chance...flick the strip out at the top of the keyboard, 
remove the tiny screw and lift (carefully) the keyboard, and make sure the 
connector under the right hand side of the keyboard is properly home.  It's 
a bit of an odd fit...

Neil


>From: Martin Drinkwater <[EMAIL PROTECTED]>
>Reply-To: Libretto <[EMAIL PROTECTED]>
>To: Libretto <[EMAIL PROTECTED]>
>Subject: Graphics Problems with Libretto 50CT
>Date: Thu, 22 Feb 2001 01:57:23 -0800
>
>Date: Thu, 22 Feb 2001 09:44:10 -0000
>From: Martin Drinkwater <[EMAIL PROTECTED]>
>Subject: Graphics Problems with Libretto 50CT
>
>Greetings,
>
>Does anyone have an idea what could cause my L50 to give distorted graphics
>in windows and dos applications.
>Its as if I am looking through a window with bars on it and also it has 
>gone
>a funny colour.
>I know this sounds terminal, but very occasionaly the screen returns to
>normal with just the odd bit of distortion on certain icons.
>I have the correct up to date driver for the graphics and the only upgrade 
>I
>have made is a 3gb hard drive.
>
>Please, can anyone help ??
>
>I would also like to know of any people in the uk that do repairs/upgrades
>in the uk ???
>
>
>Best regards
>
>Martin

_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.




**************************************************************
http://libretto.basiclink.com - Libretto mailing list                
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ         
                 -------UNSUBSCRIBE-------                            
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe 
            --------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...                           
**************************************************************

Reply via email to