Date: Tue, 11 Mar 2003 08:10:43 -0600 From: [EMAIL PROTECTED] Subject: RE: L100 overclocking
Few things I learned in Texas: - add some more heatsink grease to the heatpipe connected to the CPU - make sure that the upper PCMCIA port is open if there is extended disk activity (like for editing video) - make sure that all screws are tight for better heat transfer, especially undek the ketboard - blow air on the L100 with a fan or if too hot, right into the PCMCIA slot with an aquarium aerator. I am planning to use a shell of a PCMCIA card to make some adapter for that. Konrad ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
