Date: Mon, 26 Apr 2004 11:10:51 EDT From: [EMAIL PROTECTED] Subject: W2K Log On Loop
I suppose this is really a W2K question, but since it's occurring on my L100, and this group is so helpful, I'm posting it here. I installed a firewall (CA EZArmor) on the L100 in W2K (it dual-boots W2K and W98se), and it did NOT work with Compuserve's integrated browser/ISP software. Locked up the PC requiring a hard reset to escape. After rebooting and shutting down the firewall, the browser still wouldn't connect. Hoping to avoid a big diagnostic hassle, I restored a Drive Image image that I'd made just prior to the firewall installation. Now, after selecting W2K from the boot loader menu, I get the log on screen and W2K accepts my ID and password. Then it sounds the startup orchestration, but displays a window saying "Saving your settings", then I'm right back at the log-on screen. I tried re-restorng the image from W98se (which still loads and runs), but the same problem occurs. Any ideas? Thank you. Lee ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
