On 4/16/12 12:10 PM, Peter Stuge wrote:
Jasmeet Bagga wrote:
[libssh2] 0.956528 Conn: Setting blocking mode OFF
[libssh2] 0.956546 Transport: session_startup for socket 13
[libssh2] 0.956554 Transport: Sending Banner: SSH-2.0-libssh2_1.4.1
[libssh2] 0.956561 Socket: Sent 23/23 bytes at 0xbb9345+0
[libssh2] 0.956992 Socket: Recved 0 bytes banner
[libssh2] 0.956996 Failure Event: -43 - Failed getting banner
[libssh2] 0.957045 Transport: Disconnecting: reason=11, desc=, lang=
=> libssh2_transport_write plain (13 bytes)
The log shows that the problem is very very early. The problem is not
likely with libssh2 at all but in your application, and the root
problem will be something you do or do not do to the socket between
start of your program and calling libssh2_session_handshake().
JFYI, the problem was that the remote device has a very low rate limit for ssh
connections and it was abruptly terminating ssh connections (after the TCP
connection succeeded), leading to the above seen errors.
//Peter
_______________________________________________
libssh2-devel http://cool.haxx.se/cgi-bin/mailman/listinfo/libssh2-devel
_______________________________________________
libssh2-devel http://cool.haxx.se/cgi-bin/mailman/listinfo/libssh2-devel
