Hi,

On 05/25/2012 10:54 PM, Alan Stern wrote:
> On Fri, 25 May 2012, Hans de Goede wrote:
>
>> To verify my theory, I've tried raising the packet splitting limit in
>> libusb to 32k and that (unsurprisingly) fixes things, but that is just
>> a bandaid and not a proper fix for the issue at hand IMHO. Also
>> bulk packets>  32k only work with the latest kernels.
>
> Judging by your description, there is a bug either in xhci-hcd or in
> your xHCI hardware.  What does "lspci -vv" show for the controller?

As promised here is the lspci -vv output for the Thinkpad W510 on which
the issue has also been observed:

0f:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 
03) (prog-if 30 [XHCI])
        Subsystem: Lenovo Device 219c
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at f2200000 (64-bit, non-prefetchable) [size=8K]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [90] MSI-X: Enable+ Count=8 Masked-
                Vector table: BAR=0 offset=00001000
                PBA: BAR=0 offset=00001080
        Capabilities: [a0] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s 
unlimited, L1 unlimited
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ 
TransPend-
                LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 
<4us, L1 unlimited
                        ClockPM+ Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis+
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, 
Selectable De-emphasis: -6dB
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB
        Capabilities: [100] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
        Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff
        Capabilities: [150] Latency Tolerance Reporting
                Max snoop latency: 0ns
                Max no snoop latency: 0ns
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci-hcd

And for reference, once more here is the output for the device on which I've 
further debugged this
and seen the behavior described in my initial mail of this thread:

01:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 
04) (prog-if 30 [XHCI])
         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 0, Cache Line Size: 64 bytes
         Interrupt: pin A routed to IRQ 16
         Region 0: Memory at fe600000 (64-bit, non-prefetchable) [size=8K]
         Capabilities: <access denied>
         Kernel driver in use: xhci_hcd

So it is almost the same NEC XHCI controller in both cases, except that mine is 
a revision 4, and the thinkpad
one is a revision 3.

Thanks & Regards,

Hans

------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
libusbx-devel mailing list
libusbx-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/libusbx-devel

Reply via email to