On 11/12/2014 07:18 AM, Ján Tomko wrote:
> On 11/12/2014 02:04 PM, Matthias Gatto wrote:
>> Fix for this:
>> http://www.redhat.com/archives/libvir-list/2014-November/msg00324.html
>>
>> Signed-off-by: Matthias Gatto <matthias.ga...@outscale.com>
>> ---
>> src/qemu/qemu_command.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
>> index a5ed8ed..f674ba9 100644
>> --- a/src/qemu/qemu_command.c
>> +++ b/src/qemu/qemu_command.c
>> @@ -3762,7 +3762,7 @@ qemuBuildDriveStr(virConnectPtr conn,
>> disk->blkdeviotune.write_iops_sec_max);
>> }
>>
>> - if (disk->blkdeviotune.write_iops_sec_max) {
>> + if (disk->blkdeviotune.size_iops_sec) {
>> virBufferAsprintf(&opt, ",iops_size=%llu",
>> disk->blkdeviotune.size_iops_sec);
>> }
>>
>
> It would be nice to have this tested in qemuxml2argvtest.
>
You mean something like:
diff --git a/tests/qemuxml2argvtest.c b/tests/qemuxml2argvtest.c
index fe58a24..c52b647 100644
--- a/tests/qemuxml2argvtest.c
+++ b/tests/qemuxml2argvtest.c
@@ -1265,6 +1265,9 @@ mymain(void)
DO_TEST("numad-static-memory-auto-vcpu", NONE);
DO_TEST("blkdeviotune", QEMU_CAPS_NAME, QEMU_CAPS_DEVICE,
QEMU_CAPS_DRIVE, QEMU_CAPS_DRIVE_IOTUNE);
+ DO_TEST("blkdeviotune-max", QEMU_CAPS_NAME, QEMU_CAPS_DEVICE,
+ QEMU_CAPS_DRIVE, QEMU_CAPS_DRIVE_IOTUNE,
+ QEMU_CAPS_DRIVE_IOTUNE_MAX);
DO_TEST("multifunction-pci-device",
QEMU_CAPS_DRIVE, QEMU_CAPS_DEVICE, QEMU_CAPS_NODEFCONFIG,
Plus of course the obligatory .xml and .args files...
Note that at most only 9 parameters can be given because there
is XML config failure if any of the "total_" values are provided
with any of their corresponding "read_"/"write_" values.
My test file has one disk with:
<iotune>
<total_bytes_sec>5000</total_bytes_sec>
<total_iops_sec>6000</total_iops_sec>
<total_bytes_sec_max>10000</total_bytes_sec_max>
<total_iops_sec_max>6000</total_iops_sec_max>
</iotune>
and the other with
<iotune>
<read_bytes_sec>5000</read_bytes_sec>
<write_bytes_sec>5000</write_bytes_sec>
<read_iops_sec>3500</read_iops_sec>
<write_iops_sec>3500</write_iops_sec>
<read_bytes_sec_max>5000</read_bytes_sec_max>
<write_bytes_sec_max>5000</write_bytes_sec_max>
<read_iops_sec_max>3500</read_iops_sec_max>
<write_iops_sec_max>3500</write_iops_sec_max>
<size_iops_sec_max>2000</size_iops_sec_max>
</iotune>
where the .args file has:
...
-drive file=/dev/HostVG/QEMUGuest1,if=none,id=drive-ide0-0-0,cache=off,\
bps=5000,iops=6000,bps_max=10000,iops_max=6000 -device \
ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \
-drive file=/dev/HostVG/QEMUGuest2,if=none,id=drive-ide0-0-1,cache=off,\
bps_rd=5000,bps_wr=5000,iops_rd=3500,iops_wr=3500,bps_rd_max=5000,\
bps_wr_max=5000,iops_rd_max=3500,iops_wr_max=3500 \
...
Testing without the QEMU_CAPS_DRIVE_IOTUNE_MAX results in:
333) QEMU XML-2-ARGV blkdeviotune-max
... libvirt: QEMU Driver error : unsupported configuration: there is
some block I/O throttling paramater that are not supported with this
QEMU binary(need QEMU 1.7 or superior)
FAILED
NOTE: Parameter is spelled wrong... and the message doesn't read well,
something I can fix.
John
--
libvir-list mailing list
libvir-list@redhat.com
https://www.redhat.com/mailman/listinfo/libvir-list
