On 02/22/2016 04:29 AM, Xiao Ma (xima2) wrote:
Hi, All
I want to use the SR-IOV of intel 82576 NIC.
I enabled IOMMU and VT-d and SR-IOV in BIOS.
And enabled VT-d in kernel.
The OS information is bellow:
[root@host3 nova]# cat /etc/redhat-release
CentOS Linux release 7.1.1503 (Core)
[root@host3 nova]# uname -an
Linux host3.localdomain 3.10.0-229.el7.x86_64 #1 SMP Fri Mar 6 11:36:42 UTC
2015 x86_64 x86_64 x86_64 GNU/Linux
[root@host3 nova]# rpm -qa|grep qemu
libvirt-daemon-driver-qemu-1.2.8-16.el7.x86_64
qemu-kvm-1.5.3-86.el7.x86_64
qemu-kvm-common-1.5.3-86.el7.x86_64
ipxe-roms-qemu-20130517-6.gitc4bce43.el7.noarch
qemu-img-1.5.3-86.el7.x86_64
[root@host3 nova]# rpm -qa|grep libvirt
libvirt-daemon-1.2.8-16.el7.x86_64
libvirt-daemon-driver-nwfilter-1.2.8-16.el7.x86_64
libvirt-python-1.2.8-7.el7.x86_64
libvirt-daemon-driver-storage-1.2.8-16.el7.x86_64
libvirt-daemon-driver-qemu-1.2.8-16.el7.x86_64
libvirt-daemon-config-nwfilter-1.2.8-16.el7.x86_64
libvirt-daemon-driver-secret-1.2.8-16.el7.x86_64
libvirt-daemon-driver-interface-1.2.8-16.el7.x86_64
libvirt-client-1.2.8-16.el7.x86_64
libvirt-glib-0.1.7-3.el7.x86_64
libvirt-daemon-driver-network-1.2.8-16.el7.x86_64
libvirt-daemon-driver-nodedev-1.2.8-16.el7.x86_64
libvirt-daemon-kvm-1.2.8-16.el7.x86_64
And I can see the vf of the NIC after ‘ echo '7' >
/sys/class/net/ens1f1/device/sriov_numvfs '
[root@host3 VTS2.1-demo]# lspci |grep -i ethernet
08:00.0 Ethernet controller: QLogic Corp. 10GbE Converged Network Adapter
(TCP/IP Networking) (rev 02)
08:00.1 Ethernet controller: QLogic Corp. 10GbE Converged Network Adapter
(TCP/IP Networking) (rev 02)
0f:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection
(rev 01)
0f:00.1 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection
(rev 01)
10:10.1 Ethernet controller: Intel Corporation 82576 Virtual Function (rev 01)
10:10.3 Ethernet controller: Intel Corporation 82576 Virtual Function (rev 01)
10:10.5 Ethernet controller: Intel Corporation 82576 Virtual Function (rev 01)
10:10.7 Ethernet controller: Intel Corporation 82576 Virtual Function (rev 01)
10:11.1 Ethernet controller: Intel Corporation 82576 Virtual Function (rev 01)
10:11.3 Ethernet controller: Intel Corporation 82576 Virtual Function (rev 01)
10:11.5 Ethernet controller: Intel Corporation 82576 Virtual Function (rev 01)
I configured the interface as bellow in XML:
<interface type="hostdev" managed="yes">
<mac address="fa:16:3e:f7:57:5f"/>
<source>
<address type="pci" domain="0x0000" bus="0x10" slot="0x10"
function="0x3"/>
</source>
<vlan>
<tag id="1000"/>
</vlan>
</interface>
But the error output when I boot one vm:
[root@host3 VTS2.1-demo]# virsh create vtc.demo.xml
error: Failed to create domain from vtc.demo.xml
error: internal error: early end of file from monitor: possible problem:
2016-02-22T07:38:42.169035Z qemu-kvm: -device
vfio-pci,host=10:10.3,id=hostdev0,bus=pci.0,addr=0x3: vfio: error, group 17 is
not viable, please ensure all devices within the iommu_group are bound to their
vfio bus driver.
One possible meaning is that vfio sees multiple devices in the same
iommu group as the VF at 10:10.3 (in case there is some other possible
cause, I'm Cc'ing Alex Williamson, the vfio author). You can check this
by looking at the output of "virsh nodedev-dumpxml pci_0000_10_10_3" and
look at the "iommuGroup" section - if there are multiple addresses
listed there, then there are multiple devices in the same iommu group.
It could be that your particular chipset needs a "quirk" in the kernel
to be told that the VFs really can be in separate iommu groups; without
that quirk, all 14 VFs show up in the same iommu group, so the only way
to assign one to a guest is to assign *all* of them to the same guest
(or at least detach all of them from the VF driver and attach to
vfio-pci, then only assign one of them to a guest while the others sit
unused).
Since you're still running a 7.1 kernel, you may want to try updating to
the latest available and see if that solves your problem.
If you have further questions, please include the output of "virsh
nodedev-dumpxxml pci_0000_10_10_3" and full lspci output (among other
things, that should tell us which chipset your machine uses).
2016-02-22T07:38:42.169215Z qemu-kvm: -device
vfio-pci,host=10:10.3,id=hostdev0,bus=pci.0,addr=0x3: vfio: failed to get group
17
2016-02-22T07:38:42.169233Z qemu-kvm: -device
vfio-pci,host=10:10.3,id=hostdev0,bus=pci.0,addr=0x3: Device initialization
failed.
2016-02-22T07:38:42.169248Z qemu-kvm: -device
vfio-pci,host=10:10.3,id=hostdev0,bus=pci.0,addr=0x3: Device 'vfio-pci' could
not be initialized
Could you please help to solve it?
Looking forward for your reply.
Thanks.
--
libvir-list mailing list
libvir-list@redhat.com
https://www.redhat.com/mailman/listinfo/libvir-list
--
libvir-list mailing list
libvir-list@redhat.com
https://www.redhat.com/mailman/listinfo/libvir-list