On 10/27/2009 01:47 PM, Kaitlin Rupert wrote:
It looks like specifying an address of [::1] instead of ::1 will work.
However, that seems like a bug. The bracket syntax is specific to
qemu, which means the user needs to have prior knowledge of this.
Not exactly specific to qemu. Many other protocols use it (eg SIP,
pretty much any URL - see section 3.2.2 of RFC3986). Basically, anywhere
the IP address might have a port tacked onto it with ":n" syntax *needs*
to have the brackets and, due to this precedent, many other places
accept it anyway.
My opinion would be that in cases where the port may be specified
URL-style as part of the address (I haven't looked to see if that's the
case here), then the brackets should be required; if port cannot be
specified using ":n" syntax, then brackets should NOT be required, but
should be accepted.
(In practice, I found that having some places where brackets were
required and some where it wasn't necessitated lots of extra code and
was just a nuisance all around (even worse to have places where brackets
weren't even accepted).
Kaitlin Rupert wrote:
Hello,
I am trying to start a QEMU guest with an IPv6 VNC address. I can
specify the address and start the guest, but the VNC port shows up
under the IPv4 list:
# virsh dumpxml domU1 | grep graphics
<graphics type='vnc' port='5900' autoport='no' listen='::1'
keymap='en-us'/>
# cat /proc/net/tcp | grep 170C
2: 00000000:170C 00000000:0000 0A 00000000:00000000 00:00000000
00000000 0 0 621103 1 ffff88007a043a80 299 0 0 2 -1
# cat /proc/net/tcp6 | grep 170C
#
# ps -ef | grep qemu
root 16451 1 43 04:17 ? 00:00:18
/usr/bin/qemu-system-x86_64 -S -M pc -m 128 -smp 1 -name domU1 -uuid
2aebe290-d1ed-11dd-90eb-001a64bc024c -monitor pty -pidfile
/var/run/libvirt/qemu//domU1.pid -no-acpi -boot c -drive
file=/tmp/default-kvm-dimage,if=ide,index=0,boot=on -net
nic,macaddr=11:22:33:aa:bb:cc,vlan=0 -net tap,fd=17,vlan=0 -serial
none -parallel none -usb -vnc ::1:0 -k en-us
I started the same guest manually, but I appended an ",ipv6' flag to
the vnc option (see below). With this change, the port shows up in
the IPv6 list.
# /usr/bin/qemu-system-x86_64 -M pc -m 128 -smp 1 -name domU1 -uuid
2aebe290-d1ed-11dd-90eb-001a64bc024c -monitor pty -pidfile
/var/run/libvirt/qemu//domU1.pid -no-acpi -boot c -drive
file=/tmp/default-kvm-dimage,if=ide,index=0,boot=on -net
nic,macaddr=11:22:33:aa:bb:cc,vlan=0 -net tap,fd=17,vlan=0 -serial
none -parallel none -usb -vnc ::1:0,ipv6 -k en-us
# cat /proc/net/tcp6 | grep 170C
2: 00000000000000000000000000000000:170C
00000000000000000000000000000000:0000 0A 00000000:00000000
00:00000000 00000000 0 0 621485 1 ffff88007a30ad00 299 0 0
2 -1
# cat /proc/net/tcp | grep 170C
#
I'd like to fix the qemu driver so that it specifies this flag, but I
am unsure whether a guest XML change or some other change is
appropriate here. Would it be better to have the qemu driver code do
some detection on the address that is passed in?
Thanks!
--
Libvir-list mailing list
Libvir-list@redhat.com
https://www.redhat.com/mailman/listinfo/libvir-list
