Hi,
We are now working on adding the support for native USB devices on oVirt.
As far as we understand, in order to use it we need to pass the following
devices with the following restrictions (according to the EHCI spec):
1. EHCI USB controller - with the highest function number, #7.
devices='{type:controller,device:usb,model:ich9-ehci1,address:{type:pci,domain:0x0000,bus:0x00,slot:0x04,function:0x7}}'
2. 3 UHCI USB controllers, on the same bus and PCI slot as the EHCI controller.
Set the multifunction bit to on, on the controller with function #0.
devices='{type:controller,device:usb,model:ich9-uhci1,master:{startport:0},address:{type:pci,domain:0x0000,bus:0x00,slot:0x04,function:0x0,multifunction:on}}'
devices='{type:controller,device:usb,model:ich9-uhci2,master:{startport:2},address:{type:pci,domain:0x0000,bus:0x00,slot:0x04,function:0x1}}'
devices='{type:controller,device:usb,model:ich9-uhci3,master:{startport:4},address:{type:pci,domain:0x0000,bus:0x00,slot:0x04,function:0x2}}'
3. USB redirect devices (according to the needed number of USB slots, maximum
6) on the same bus, each one having a different port.
devices='{type:redir,device:spicevmc,bus:usb,address:{type:usb,bus:0,port:1}}'
devices='{type:redir,device:spicevmc,bus:usb,address:{type:usb,bus:0,port:2}}'
devices='{type:redir,device:spicevmc,bus:usb,address:{type:usb,bus:0,port:3}}'
devices='{type:redir,device:spicevmc,bus:usb,address:{type:usb,bus:0,port:4}}'
devices='{type:redir,device:spicevmc,bus:usb,address:{type:usb,bus:0,port:5}}'
devices='{type:redir,device:spicevmc,bus:usb,address:{type:usb,bus:0,port:6}}'
4. If we want more than 6 USB slots, we need to have 2 EHCI controllers, and 6
UHCI controllers, that are consistent with the restrictions above, on different
bus.
(we need them to be on different bus, since the connection between the redirect
devices and the controllers is the bus).
According to Hans (cc-ed), if we let libvirt pick its own addresses, it will
put each controller of the composite USB controller device on its own pci slot,
which is a violation of the EHCI spec.
The problem is that the oVirt engine is not aware of addresses. They aren't
managed by it.
They are chosen automatically by libvirt, returned to the engine, and they
saved in the engine database in order to provide the ability to retain the same
PCI addresses after VM restart.
So, in order to support the EHCI spec, oVirt will have to be aware of
addresses, manage them (allocate them, check for collisions, update on every
libvirt change regarding that, etc...). Obviously, it doesn't feel right, and
in fact it is also not feasible, to manage these addresses in the oVirt domain.
Is all the above correct, or are we missing something?
If so, can you address the issues above, and provide the ability to manage
these devices in libvirt?
