On 05/15/2012 05:33 PM, Michal Privoznik wrote:
On 15.05.2012 10:57, Lei Li wrote:
Hi guys,
I know the macvtap network is supported by libvirt as forward mode
'passthrough', I wonder is there anyway to configure the IP address
for its interface?
For example, If I create a network as below:
<network>
<name>vdsm-testnet</name>
<uuid>31f6b3b3-e959-0dd1-ad3a-bf95db660415</uuid>
<forward dev='eth0.8' mode='passthrough'>
<interface dev='eth0.8'/>
</forward>
</network>
For now, I have to set the IP address by 'ifconfig eth0.8 XXX.XXX.XXX.XXX'
after defining the network.
How can I set IP address for this VLAN device 'eth0.8' by libvirt, I mean
does libvirt support to assign IP address in this mode now? If does,
what is the
xml format for it?
It'd appreciate a lot if anybody could read my post and give me some
suggestions!
I suppose adding:
<ip address='192.168.123.1' netmask='255.255.255.0'/>
into<network/> should work, doesn't it?
Thank you very much for your reply!
I did try to add IP address like this, but seems it didn't work...
<network>
<name>vdsm-testnet</name>
<uuid>9b1b162c-3056-de63-6785-30b45abf24cf</uuid>
<forward dev='eth0.6' mode='passthrough'>
<interface dev='eth0.6'/>
</forward>
<ip address='192.168.123.1' netmask='255.255.255.0'>
</ip>
</network>
or
...
...
<ip address='192.168.123.1' netmask='255.255.255.0'/>
...
Michal
--
libvir-list mailing list
libvir-list@redhat.com
https://www.redhat.com/mailman/listinfo/libvir-list
--
Lei
--
libvir-list mailing list
libvir-list@redhat.com
https://www.redhat.com/mailman/listinfo/libvir-list