----- Original Message -----
From: "Julien Rioux" <julien.ri...@gmail.com>
To: "Phil Holmes" <m...@philholmes.net>
Cc: <lilypond-devel@gnu.org>; <re...@codereview-hr.appspotmail.com>
Sent: Wednesday, January 11, 2012 9:41 PM
Subject: Re: Build translated manuals: Don't rebuild everything each
timeunless necessary. (issue 5494069)
On Wed, Jan 11, 2012 at 1:50 PM, Phil Holmes <m...@philholmes.net> wrote:
----- Original Message ----- From: <julien.ri...@gmail.com>
To: <julien.ri...@gmail.com>
Cc: <re...@codereview-hr.appspotmail.com>; <lilypond-devel@gnu.org>
Sent: Wednesday, January 11, 2012 2:39 PM
Subject: Re: Build translated manuals: Don't rebuild everything each
timeunless necessary. (issue 5494069)
Please review. I tested make, make check, make doc, and do not get any
problem. However, with the previous versions I also did not get any
problem, yet I broke staging. I would be grateful if someone with a fast
machine could test a parallel make doc. I would not be comfortable
pushing to staging without this test.
Regards,
Julien
On my fast system, make doc takes 12min 30 approx and currently produces a
6.5 meg logfile. I've run a system patched with this, and it ran for over
20 minutes, with no apparent updates to the output, which was "only" about
1
meg. Only one CPU was being used (of 8) and this was 100% processing make.
make output is available if you want to see what I have.
--
Phil Holmes
Thanks for testing. Did make doc ever finish? Maybe it decided that
things need to be done in series, which could take up to 1h40m based
on your fast parallel build on 8 CPUs. You can send the output
privately.
Thanks,
Regards,
Julien
================================================
I terminated it before it got that far. I'll run it again tomorrow to see.
--
Phil Holmes
_______________________________________________
lilypond-devel mailing list
lilypond-devel@gnu.org
https://lists.gnu.org/mailman/listinfo/lilypond-devel
