|
IT works! on machine
witout LaTeX - I've installed tetex-extra
--letters in bar.pdf are a little bit quadratic but O.K .
On PC with LaTeX still are problems. All commands you gave me I tested on Win2000 with LateX and extra package and I send now the result; sample2e.pdf is empty with errors. READ! below copyied cygwin window in bold text. [EMAIL PROTECTED] ~ $ lilypond bar.ly lilypond (GNU LilyPond) 2.2.5 Running lilypond-bin... Now processing `bar.ly' Parsing... Interpreting music... error: can't find `feta20.afm' Fonts have not been installed properly. Aborting lilypond: error: LilyPond failed on input file bar (exit status 1) lilypond: warning: Running LilyPond failed. Rerun with --verbose for a trac [EMAIL PROTECTED] ~ $ unset TEXMF /etc/postinstall/post-texmf.sh.done % maybe hier is something missing bash: unset: `/etc/postinstall/post-texmf.sh.done': not a valid identifier [EMAIL PROTECTED] ~ $ lilypond bar.ly lilypond (GNU LilyPond) 2.2.5 Running lilypond-bin... Now processing `bar.ly' Parsing... Interpreting music... error: can't find `feta20.afm' Fonts have not been installed properly. Aborting lilypond: error: LilyPond failed on input file bar (exit status 1) lilypond: warning: Running LilyPond failed. Rerun with --verbose for a trac [EMAIL PROTECTED] ~ $ tex testfont This is TeX, Version 3.14159 (Web2C 7.4.5) (/usr/share/texmf/tex/plain/base/testfont.tex Name of the font to test = ecrm1000 kpathsea: Running mktextfm ecrm1000 mktextfm: Cannot find mktex.opt; check your installation. kpathsea: Appending font creation commands to missfont.log. ! Font \testfont=ecrm1000 not loadable: Metric (TFM) file not found. <to be read again> \spaceskip \startfont ...ont \testfont =\fontname \spaceskip =0pt \leftline {\sevenrm \init ...test = } \read -1 to\fontname \startfont \message {Now type a test l.208 \ifx\noinit!\else\init \fi ? \table\bye Type <return> to proceed, S to scroll future error messages, R to run without stopping, Q to run quietly, I to insert something, E to edit your file, 1 or ... or 9 to ignore the next 1 to 9 tokens of input, H for help, X to quit. ? x No pages of output. Transcript written on testfont.log. [EMAIL PROTECTED] ~ $ kpsewhich ecrm1000.tfm [EMAIL PROTECTED] ~ $ unset TEXMF [EMAIL PROTECTED] ~ $ kpsexpand \$TEXMF [EMAIL PROTECTED] ~ $ lilypond bar.ly lilypond (GNU LilyPond) 2.2.5 Running lilypond-bin... Now processing `bar.ly' Parsing... Interpreting music... error: can't find `feta20.afm' Fonts have not been installed properly. Aborting lilypond: error: LilyPond failed on input file bar (exit status 1) lilypond: warning: Running LilyPond failed. Rerun with --verbose for a trac [EMAIL PROTECTED] ~ $ latex sample2e This is TeX, Version 3.14159 (Web2C 7.4.5) ---! Must increase the trie size (Fatal format file error; I'm stymied) [EMAIL PROTECTED] ~ $ unset TEXMF [EMAIL PROTECTED] ~ $ kpsexpand \$TEXMF [EMAIL PROTECTED] ~ $ latex sample2e This is TeX, Version 3.14159 (Web2C 7.4.5) ---! Must increase the trie size (Fatal format file error; I'm stymied) [EMAIL PROTECTED] ~ $ Now I have unistall all packages an run [EMAIL PROTECTED] ~ $ lilypond bar.ly bash: lilypond: command not found [EMAIL PROTECTED] ~ $ Step2 And I install tetex-tiny, base, extra as shown in packagesstep2.tif [EMAIL PROTECTED] ~ $ lilypond bar.ly lilypond (GNU LilyPond) 2.2.5 Running lilypond-bin... Now processing `bar.ly' Parsing... Interpreting music... error: can't find `feta20.afm' Fonts have not been installed properly. Aborting lilypond: error: LilyPond failed on input file bar (exit status 1) lilypond: warning: Running LilyPond failed. Rerun with --verbose for a trace. [EMAIL PROTECTED] ~ $ I reinstalled all packages, and the same error as above. I unistalled all packages [EMAIL PROTECTED] ~ $ lilypond bar.ly bash: lilypond: command not found [EMAIL PROTECTED] ~ $ And I installed as in installation help for windows, still feta. [EMAIL PROTECTED] ~ $ lilypond bar.ly lilypond (GNU LilyPond) 2.2.5 Running lilypond-bin... Now processing `bar.ly' Parsing... Interpreting music... error: can't find `feta20.afm' Fonts have not been installed properly. Aborting lilypond: error: LilyPond failed on input file bar (exit status 1) lilypond: warning: Running LilyPond failed. Rerun with --verbose for a trace. [EMAIL PROTECTED] ~ $ And the same feta error after reinstallation. Profile file is not overwritten. Running lilypond-bin... Now processing `bar.ly' Parsing... Interpreting music... error: can't find `feta20.afm' Fonts have not been installed properly. Aborting lilypond: error: LilyPond failed on input file bar (exit status 1) lilypond: warning: Running LilyPond failed. Rerun with --verbose for a trace. [EMAIL PROTECTED] ~ $ tex testfont This is TeX, Version 3.14159 (Web2C 7.4.5) (/usr/share/texmf/tex/plain/base/testfont.tex Name of the font to test = ecrm1000 kpathsea: Running mktextfm ecrm1000 mktextfm: Cannot find mktex.opt; check your installation. kpathsea: Appending font creation commands to missfont.log. ! Font \testfont=ecrm1000 not loadable: Metric (TFM) file not found. <to be read again> \spaceskip \startfont ...ont \testfont =\fontname \spaceskip =0pt \leftline {\sevenrm T... \init ...test = } \read -1 to\fontname \startfont \message {Now type a test ... l.208 \ifx\noinit!\else\init \fi ? I will try to delete cygwin folder.
# Some resources... # Customizing Your Shell: http://www.dsl.org/cookbook/cookbook_5.html#SEC69 # Consistent BackSpace and Delete Configuration: # http://www.ibb.net/~anne/keyboard.html # The Linux Documentation Project: http://www.tldp.org/ # The Limux Cookbook: http://www.tldp.org/LDP/linuxcookbook/html/ # Setup some default paths. Note that this order will allow user installed # software to override 'system' software # If you wish to change the path for all users, it is recommended you edit # /etc/bash.bashrc # If you wish all future users to have some default setup, it is recommended you # edit /etc/skel/.bashrc # If you wish to change the path on a user by user basis, it is recommended you # edit ~/.bashrc PATH="/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:$PATH" export PATH MANPATH="/usr/local/man:/usr/man:/usr/share/man:/usr/autotool/devel/man:$MANPATH" export MANPATH INFOPATH="/usr/local/info:/usr/info:/usr/share/info:/usr/autotool/devel/info:/usr/autotool/stable/info:$INFOPATH" export INFOPATH # Set the user id USER="`id -un`" export USER # Here is how HOME is set, in order of priority, when starting from Windows # 1) From existing HOME in the Windows environment, translated to a Posix path # 2) from /etc/passwd, if there is an entry with a non empty directory field # 3) from HOMEDRIVE/HOMEPATH # 4) / (root) # If the home directory doesn't exist, create it. if [ ! -d "$HOME" ]; then mkdir -p "$HOME" echo "Copying skeleton files." echo "These files are for the user to personalise" echo "their cygwin experience." echo echo "These will never be overwritten." echo cd /etc/skel /bin/find . -type f | while read f; do fDest=`echo $f | sed -e 's/^\.//g'` if [ ! -e "$HOME$fDest" -a ! -L "$HOME$fDest" ]; then /usr/bin/install -D -p -v "${f}" "${HOME}/${fDest}" fi done fi # Run all of the profile.d scripts # Note that these are supplied by separate packages # Ascending alphanumerical order enforced if [ -d "/etc/profile.d" ]; then while read f; do if [ -f "$f" ]; then . "$f" fi done <<- EOF `/bin/find /etc/profile.d -iname '*.sh' -type f | sort` EOF fi # Default to unix make mode MAKE_MODE=unix export MAKE_MODE # It is recommended that cvs uses ssh for it's remote shell environment CVS_RSH=/bin/ssh export CVS_RSH # Patches to Cygwin always appreciated ;) # CVSROOT=:pserver:[EMAIL PROTECTED]:/cvs/src # export CVSROOT # Shell dependent settings case "`echo "$0" | /usr/bin/tr [:upper:] [:lower:]`" in bash | -bash | */bash | \ bash.exe | -bash.exe | */bash.exe ) # Set a HOSTNAME variable HOSTNAME=`hostname` export HOSTNAME # Set a default prompt of: [EMAIL PROTECTED] and current_directory PS1='\[\033]0;\w\007 [EMAIL PROTECTED] \[\033[33m\w\033[0m\] $ ' if tty --quiet ; then stty erase '^?' fi ;; ksh* | -ksh* | */ksh* | \ ksh*.exe | -ksh*.exe | */ksh*.exe ) # Set a HOSTNAME variable typeset -l HOSTNAME # Set a default prompt of: [EMAIL PROTECTED] and current_directory PS1='^[]0;${PWD}^G [EMAIL PROTECTED] ^[[33m${PWD}^[[0m $ ' ;; sh | -sh | */sh | \ sh.exe | -sh.exe | */sh.exe ) # Set a simple prompt PS1='$ ' ;; * ) # Sorry, this shell has no defaults in /etc/profile, # feel free to add your own. # If you have some recommendations for what these defaults # should be, please contact [EMAIL PROTECTED] with the # shell details and what you would like added. # Thanks PS1='$ ' ;; esac export PS1 # Uncomment to use the terminal colours set in DIR_COLOR # eval `dircolors -b /etc/DIR_COLORS` # Default to removing the write permission for group and other # (files normally created with mode 777 become 755; files created with # mode 666 become 644) umask 022 # Define default printer PRINTER="" case "`uname -s`" in CYGWIN_NT-*) PRINTER="`regtool -q get '\user\Software\Microsoft\Windows NT\CurrentVersion\Windows\Device' | sed 's/,.*$//'`" ;; CYGWIN_9?-*) PRINTER="`regtool -q get '\config\System\CurrentControlSet\Control\Print\Printers\Default'`" ;; esac export PRINTER # Make sure we start in home cd "$HOME" # Check to see if mkpasswd/mkgroup needs to be run try and cut down the emails # about this on the lists! # If this message keeps appearing and you are sure it's a mistake (ie, don't # email about it!), comment out the test below. case "`id -ng`" in mkpasswd ) echo "Your group is currently \"mkpasswd\". This indicates that" echo "the /etc/passwd (and possibly /etc/group) files should be rebuilt." echo "See the man pages for mkpasswd and mkgroup then, for example, run" echo "mkpasswd -l [-d] > /etc/passwd" echo "mkgroup -l [-d] > /etc/group" echo "Note that the -d switch is necessary for domain users." ;; mkgroup ) echo "Your group is currently \"mkgroup\". This indicates that" echo "the /etc/group (and possibly /etc/passwd) files should be rebuilt." echo "See the man pages for mkpasswd and mkgroup then, for example, run" echo "mkpasswd -l [-d] > /etc/passwd" echo "mkgroup -l [-d] > /etc/group" echo "Note that the -d switch is necessary for domain users." ;; mkgroup_l_d ) echo "Your group name is currently \"mkgroup_l_d\". This indicates that not" echo "all domain users and groups are listed in the /etc/passwd and" echo "/etc/group files." echo "See the man pages for mkpasswd and mkgroup then, for example, run" echo "mkpasswd -l -d > /etc/passwd" echo "mkgroup -l -d > /etc/group" echo echo "This message is only displayed once (unless you recreate /etc/group)" echo "and can be safely ignored." # only display the above once cp -f /etc/group ~/group.mkgroup_l_d \ && ( [ -w /etc/group ] || chmod --silent a+w /etc/group ; )\ && sed -e 's/^mkgroup_l_d/mkgroup-l-d/' ~/group.mkgroup_l_d > /etc/group \ && chmod --silent --reference=/etc/passwd /etc/group rm -f ~/group.mkgroup_l_d ;; esac |
sample2e.pdf
Description: Adobe PDF document
unset TEXMF unset TEXMFCNF unset TEXMFTEMP # base-files version 3.0-3 # Some resources... # Customizing Your Shell: http://www.dsl.org/cookbook/cookbook_5.html#SEC69 # Consistent BackSpace and Delete Configuration: # http://www.ibb.net/~anne/keyboard.html # The Linux Documentation Project: http://www.tldp.org/ # The Limux Cookbook: http://www.tldp.org/LDP/linuxcookbook/html/ # Setup some default paths. Note that this order will allow user installed # software to override 'system' software # If you wish to change the path for all users, it is recommended you edit # /etc/bash.bashrc # If you wish all future users to have some default setup, it is recommended you # edit /etc/skel/.bashrc # If you wish to change the path on a user by user basis, it is recommended you # edit ~/.bashrc PATH="/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:$PATH" export PATH MANPATH="/usr/local/man:/usr/man:/usr/share/man:/usr/autotool/devel/man:$MANPATH" export MANPATH INFOPATH="/usr/local/info:/usr/info:/usr/share/info:/usr/autotool/devel/info:/usr/autotool/stable/info:$INFOPATH" export INFOPATH # Set the user id USER="`id -un`" export USER # Here is how HOME is set, in order of priority, when starting from Windows # 1) From existing HOME in the Windows environment, translated to a Posix path # 2) from /etc/passwd, if there is an entry with a non empty directory field # 3) from HOMEDRIVE/HOMEPATH # 4) / (root) # If the home directory doesn't exist, create it. if [ ! -d "$HOME" ]; then mkdir -p "$HOME" echo "Copying skeleton files." echo "These files are for the user to personalise" echo "their cygwin experience." echo echo "These will never be overwritten." echo cd /etc/skel /bin/find . -type f | while read f; do fDest=`echo $f | sed -e 's/^\.//g'` if [ ! -e "$HOME$fDest" -a ! -L "$HOME$fDest" ]; then /usr/bin/install -D -p -v "${f}" "${HOME}/${fDest}" fi done fi # Run all of the profile.d scripts # Note that these are supplied by separate packages # Ascending alphanumerical order enforced if [ -d "/etc/profile.d" ]; then while read f; do if [ -f "$f" ]; then . "$f" fi done <<- EOF `/bin/find /etc/profile.d -iname '*.sh' -type f | sort` EOF fi # Default to unix make mode MAKE_MODE=unix export MAKE_MODE # It is recommended that cvs uses ssh for it's remote shell environment CVS_RSH=/bin/ssh export CVS_RSH # Patches to Cygwin always appreciated ;) # CVSROOT=:pserver:[EMAIL PROTECTED]:/cvs/src # export CVSROOT # Shell dependent settings case "`echo "$0" | /usr/bin/tr [:upper:] [:lower:]`" in bash | -bash | */bash | \ bash.exe | -bash.exe | */bash.exe ) # Set a HOSTNAME variable HOSTNAME=`hostname` export HOSTNAME # Set a default prompt of: [EMAIL PROTECTED] and current_directory PS1='\[\033]0;\w\007 [EMAIL PROTECTED] \[\033[33m\w\033[0m\] $ ' if tty --quiet ; then stty erase '^?' fi ;; ksh* | -ksh* | */ksh* | \ ksh*.exe | -ksh*.exe | */ksh*.exe ) # Set a HOSTNAME variable typeset -l HOSTNAME # Set a default prompt of: [EMAIL PROTECTED] and current_directory PS1='^[]0;${PWD}^G [EMAIL PROTECTED] ^[[33m${PWD}^[[0m $ ' ;; sh | -sh | */sh | \ sh.exe | -sh.exe | */sh.exe ) # Set a simple prompt PS1='$ ' ;; * ) # Sorry, this shell has no defaults in /etc/profile, # feel free to add your own. # If you have some recommendations for what these defaults # should be, please contact [EMAIL PROTECTED] with the # shell details and what you would like added. # Thanks PS1='$ ' ;; esac export PS1 # Uncomment to use the terminal colours set in DIR_COLOR # eval `dircolors -b /etc/DIR_COLORS` # Default to removing the write permission for group and other # (files normally created with mode 777 become 755; files created with # mode 666 become 644) umask 022 # Define default printer PRINTER="" case "`uname -s`" in CYGWIN_NT-*) PRINTER="`regtool -q get '\user\Software\Microsoft\Windows NT\CurrentVersion\Windows\Device' | sed 's/,.*$//'`" ;; CYGWIN_9?-*) PRINTER="`regtool -q get '\config\System\CurrentControlSet\Control\Print\Printers\Default'`" ;; esac export PRINTER # Make sure we start in home cd "$HOME" # Check to see if mkpasswd/mkgroup needs to be run try and cut down the emails # about this on the lists! # If this message keeps appearing and you are sure it's a mistake (ie, don't # email about it!), comment out the test below. case "`id -ng`" in mkpasswd ) echo "Your group is currently \"mkpasswd\". This indicates that" echo "the /etc/passwd (and possibly /etc/group) files should be rebuilt." echo "See the man pages for mkpasswd and mkgroup then, for example, run" echo "mkpasswd -l [-d] > /etc/passwd" echo "mkgroup -l [-d] > /etc/group" echo "Note that the -d switch is necessary for domain users." ;; mkgroup ) echo "Your group is currently \"mkgroup\". This indicates that" echo "the /etc/group (and possibly /etc/passwd) files should be rebuilt." echo "See the man pages for mkpasswd and mkgroup then, for example, run" echo "mkpasswd -l [-d] > /etc/passwd" echo "mkgroup -l [-d] > /etc/group" echo "Note that the -d switch is necessary for domain users." ;; mkgroup_l_d ) echo "Your group name is currently \"mkgroup_l_d\". This indicates that not" echo "all domain users and groups are listed in the /etc/passwd and" echo "/etc/group files." echo "See the man pages for mkpasswd and mkgroup then, for example, run" echo "mkpasswd -l -d > /etc/passwd" echo "mkgroup -l -d > /etc/group" echo echo "This message is only displayed once (unless you recreate /etc/group)" echo "and can be safely ignored." # only display the above once cp -f /etc/group ~/group.mkgroup_l_d \ && ( [ -w /etc/group ] || chmod --silent a+w /etc/group ; )\ && sed -e 's/^mkgroup_l_d/mkgroup-l-d/' ~/group.mkgroup_l_d > /etc/group \ && chmod --silent --reference=/etc/passwd /etc/group rm -f ~/group.mkgroup_l_d ;; esac
<<inline: packagesStep2.tif>>
_______________________________________________ lilypond-user mailing list [EMAIL PROTECTED] http://lists.gnu.org/mailman/listinfo/lilypond-user
