Hi, I am still not able to make the board work. With a new SD card, we are getting the same problem.
We do: ./linaro-media-create --mmc /dev/mmcblk0 rootfs ext3 --dev beagle --binary image/linaro-m-headless-tar-*.tar.gz --hwpack /root/hwpack_linaro-omap3_20110106-0_armel_supported.tar.gz The image that we are using is linaro-m-headless-tar-20101123-0.tar.gz. We tried to install linaro-natty-headless-tar-20110106-0.tar.gz, but the installation process was stuck, probably because the host Ubuntu is Lucid: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=10.04 DISTRIB_CODENAME=lucid DISTRIB_DESCRIPTION="Ubuntu 10.04.1 LTS" Trying to start the board from SD card we are getting the error below on the console: Texas Instruments X-Loader 1.4.4ss (Dec 5 2010 - 02:35:14) Beagle xM Rev A Reading boot sector not there u-boot.bin not found or blank nand contents - attempting serial boot . . . ## Ready for binary (kermit) download to 0x80008000 at 115200 bps... Thanks, Ira >> Do you have another SD card you can try? They rot and die, >> unfortunately :/ > > After redoing everything once again with the newer packages, I tend to > think that the problem is indeed in the card. I don't get "Reading > from mmc" message, and if I press the "user" button, it doesn't > respond at all. I'll try to get another SD card. > > Thanks, > Ira > >> >> Cheers, >> mwh >> > _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev