Hi John,
These are the patches not yet merged upstream, but are required
for a good enabling of u-boot on i.MX53 QuickStart board. Please
consider pull.
Thanks
The following changes since commit b80e315300b0717be4b273ddb53dbafa483f4066:
Efika: fix build breakage (2011-06-22 20:04:02 -0600)
are available in the git repository at:
git://git.linaro.org/bsp/freescale/u-boot-linaro-natty.git master
Eric Miao (2):
mx53loco: define ERRATUM_ESDHC111
mx53loco: workaround VPU TO2 Errata by increasing peripheral voltage
Jason Liu (3):
mx5: Add clock config interface
mx53loco: PMIC: Add dialog pmic support
mx53loco: Add power init support
arch/arm/cpu/armv7/mx5/clock.c | 551 ++++++++++++++++++++++++++++-
arch/arm/include/asm/arch-mx5/clock.h | 4 +
arch/arm/include/asm/arch-mx5/crm_regs.h | 6 +
arch/arm/include/asm/arch-mx5/imx-regs.h | 1 +
arch/arm/include/asm/arch-mx5/sys_proto.h | 2 +
board/freescale/mx53loco/mx53loco.c | 97 +++++
drivers/misc/Makefile | 1 +
drivers/misc/dialog_pmic.c | 123 +++++++
include/configs/mx53loco.h | 15 +
include/da9053.h | 186 ++++++++++
10 files changed, 983 insertions(+), 3 deletions(-)
create mode 100644 drivers/misc/dialog_pmic.c
create mode 100644 include/da9053.h
_______________________________________________
linaro-dev mailing list
[email protected]
http://lists.linaro.org/mailman/listinfo/linaro-dev
