On Tue, Nov 15, 2011 at 6:36 AM, Rajendra Nayak <rna...@ti.com> wrote:
> Fix some minor typos in the pinctrl documentation. (...) > -the pins from 0 in the upper left corner to 63 in the lower right corner, > +the pins from 0 in the lower left corner to 63 in the upper right corner, It's the PINCTRL_PIN() defintions that are wrong, this text is correct. So it should be: const struct pinctrl_pin_desc foo_pins[] = { PINCTRL_PIN(0, "A8"), PINCTRL_PIN(1, "B8"), PINCTRL_PIN(2, "C8"), ... PINCTRL_PIN(61, "F1"), PINCTRL_PIN(62, "G1"), PINCTRL_PIN(63, "H1"), }; Fixed this, will send another patch. > -static struct pinctrl_gpio_range gpio_range_a = { > +static struct pinctrl_gpio_range gpio_range_b = { OK fixed this. > .name = "chip b", > .id = 0, > .base = 48, > @@ -762,42 +762,42 @@ case), we define a mapping like this: > .name "2bit" > .ctrl_dev_name = "pinctrl.0", > .function = "mmc0", > - .group = "mmc0_0_grp", > + .group = "mmc0_1_grp", > .dev_name = "foo-mmc.0", > }, > { > .name "4bit" > .ctrl_dev_name = "pinctrl.0", > .function = "mmc0", > - .group = "mmc0_0_grp", > + .group = "mmc0_1_grp", > .dev_name = "foo-mmc.0", > }, > { > .name "4bit" > .ctrl_dev_name = "pinctrl.0", > .function = "mmc0", > - .group = "mmc0_1_grp", > + .group = "mmc0_2_grp", > .dev_name = "foo-mmc.0", > }, > { > .name "8bit" > .ctrl_dev_name = "pinctrl.0", > .function = "mmc0", > - .group = "mmc0_0_grp", > + .group = "mmc0_1_grp", > .dev_name = "foo-mmc.0", > }, > { > .name "8bit" > .ctrl_dev_name = "pinctrl.0", > .function = "mmc0", > - .group = "mmc0_1_grp", > + .group = "mmc0_2_grp", > .dev_name = "foo-mmc.0", > }, > { > .name "8bit" > .ctrl_dev_name = "pinctrl.0", > .function = "mmc0", > - .group = "mmc0_2_grp", > + .group = "mmc0_3_grp", > .dev_name = "foo-mmc.0", > }, OK fixed this... I'll submit a separate patch with your Reported-by: and Randy's fixes folded in. Thanks, Linus Walleij _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev