On Mon, Aug 22, 2011 at 3:35 PM, Christian Robottom Reis <k...@linaro.org> wrote: > On Fri, Aug 19, 2011 at 04:38:51PM +0100, Ramana Radhakrishnan wrote: >> * Having some problems getting my panda board working reliably. I'm >> not sure if its the temperature or what but when it gets hot in the >> office as it was on Tuesday keeping it working reliably is hard. The >> board locks up and then crashes quite often. > > I wonder if you want to test the thermal management code coming from the > PMWG; Amit?
The current generation of Pandas (4430-based) can't be salvaged[1]. They have a bad thermal sensor (wrong location, spurious values, etc.) Our work is on the 4460-based SoC and Pandaboards for those won't be available until November. The testing in down on boards that only TI has access to ATM (Blaze) /Amit [1] Through software, that is. You could solder a new sensor to the i2c, etc. or simply put on fan on top. _______________________________________________ linaro-toolchain mailing list linaro-toolchain@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-toolchain