Hi Narendra,

That looks like you have another telnet connection to the board, or you haven't 
set up your serial console correctly.

Dave

Sent from my Aldis Lamp

> On 27 Feb 2015, at 06:46, Narendra Kumar <[email protected]> 
> wrote:
> 
> 
> Hi Senthil, 
> 
> 
> I am getting some error while deploying image in panda. I am sharing log can 
> you tell me what could be the issue.
> 
> ErrorMessage: Trying 127.0.0.1... Connected to localhost. Escape character is 
> '^]'. ser2net port 4000 device /dev/ttyS0 [115200 N81] (Debian GNU/Linux) 
> Connection closed by foreign host. CriticalError: Trying 127.0.0.1... 
> Connected to localhost. Escape character is '^]'. ser2net port 4000 device 
> /dev/ttyS0 [115200 N81] (Debian GNU/Linux) Connection closed by foreign host.
> 
>> On Thu, Feb 26, 2015 at 7:10 PM, Senthil Kumaran 
>> <[email protected]> wrote:
>> Hi Narendra,
>> 
>>> On Thursday 26 February 2015 06:48 PM, Narendra Kumar wrote:
>>> we need to only master images for testing? Using of  images located at
>>> "https://releases.linaro.org/"; is allowed?
>> 
>> Master image helps to leave the board in a useable state after each job run 
>> in LAVA. You can read about master images here - 
>> https://validation.linaro.org/static/docs/lava-image-creation.html?highlight=master%20image
>>  and here - 
>> https://git.linaro.org/lava/lava-master-image-scripts.git/blob_plain/HEAD:/README
>> 
>> Test images are the images that you specify within the job JSON, on which 
>> you want your tests to get executed. These could be images from 
>> https://releases.linaro.org or elsewhere. These images will have the 
>> partition layout already setup by master images for deploying these images 
>> in device under test (DUT) that is connected with LAVA.
>> 
>> 
>> Thank You.
>> -- 
>> Senthil Kumaran
>> http://www.stylesen.org/
>> http://www.sasenthilkumaran.com/
> 
> 
> 
> -- 
> <image002.png>Please consider the environment before printing this e-mail
> 
> Thanks & Regards
> Narendra Kumar Chepuri
> (+917353049544)
> <job_56.log>
> <panda01.conf>
> <panda-basic-usb-test.json>
> _______________________________________________
> linaro-validation mailing list
> [email protected]
> http://lists.linaro.org/mailman/listinfo/linaro-validation
_______________________________________________
linaro-validation mailing list
[email protected]
http://lists.linaro.org/mailman/listinfo/linaro-validation

Reply via email to