Tom, Shouldn't your Point 4 include "and any subfolders within it"? I've always used subfolders within the Xtras folder but never knew how many levels down the projector looks. It might be useful to know. Thanks for an excellent writeup, I'll save it.
Slava At 10:36 AM 7/15/04 -0700, you wrote: >Upon projector launch the code follows this detection process: > >1. Look inside the projector, are the DLL's there? If yes, unpack them to a temp >directory and link against those temporary copies. If not proceed to step 2. > >2. Look next to the projector, are the DLL's there? If yes, load and use those >copies. If not proceed to step 3. > >3. (D8 and newer only, if in D7 go to step 4) Look for a folder named Xtras next to >the projector, are the DLL's there? If yes load and use those copies. If not proceed >to step 4. > >4. Check the system directory for copies of the needed DLL files, if found load and >use them, if not the projector launch fails. >... [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED]). Lingo-L is for learning and helping with programming Lingo. Thanks!]