Hi, thanks for your reply. while compiling libosip2(2.2.2), speex(1.2), readline(5.1), ncurses(5.6), every thing goes fine. I did set the correct lib and header path, since there is no error or warning message while compiling linphone. I was trying to put linphonec on an embedded ARM platform, so I try to use a static compilation with "-static" cflags and the file size is obviously bigger than share compilation. But while executing , it complains cant find the shared objec file "libreadline.so.5". Does anyone try to compile linphone with "-static" option?
On 9/13/07, sanil d <[EMAIL PROTECTED]> wrote: > > as god lu mentioned, please check all the libraries are present or not. > > During the compilation process, everything went well? Did you add all the > install directory structure including all the files to the board. One more > tip is that, please tar the installed directory on the compiled machine and > take that tar to the board and untar their. It help to keep all the links > intact. > > Also, make sure that your paths are set properly on the board. > > all the best. > > -skd > > > > On 9/13/07, god lu <[EMAIL PROTECTED]> wrote: > > > > Hi, > > You can use arm-linux-ldd to check which lib your board doesn't have, > > and add it. > > > > The usage of arm-linux-ldd is; > > > > *arm-linux-ldd linphonec* > > > > Then it will display all the libs linphonec needs. > > > > Good luck. > > > > > > > > > > 2007/9/12, Cheng-Yen Lin <[EMAIL PROTECTED]>: > > > > > > Hi, thanks for your reply > > > > > > I try that, but still the same problem @@ > > > > > > On 9/12/07, sanil d < [EMAIL PROTECTED] > wrote: > > > > > > > > Hi, > > > > > > > > > > > > in the second case, did you set the LD_LIBRARY_PATH for the > > > > libraries? > > > > > > > > When i tried cross compilation, i copied the installed directories > > > > with all the related libs and files (usr/local/<directories>) to the > > > > board > > > > and set the LD_LIBRARY_PATH to usr/local/lib. It worked. > > > > > > > > See my command line option for configure:: > > > > > > > > ./configure --prefix=<give the prefix for install dir> --host=<cross > > > > tool like arm-linux --with-gnu-ld --disable-static --disable-glib > > > > --with-osip=$ARM_INSTALL_TREE/usr/local > > > > OSIP_CFLAGS="-I$ARM_INSTALL_TREE/usr/local/include" > > > > OSIP_LIBS="-L$ARM_INSTALL_TREE/usr/local/lib -losip2 -losipparser2" > > > > --with-readline=$ARM_INSTALL_TREE/usr/local > > > > SPEEX_CFLAGS="-I$ARM_INSTALL_TREE/usr/local/include" > > > > SPEEX_LIBS="-L$ARM_INSTALL_TREE/usr/local/lib -lspeex " > > > > PKG_CONFIG_PATH=$ARM_INSTALL_TREE/<path for pkgconfig> --disable-video > > > > make > > > > make install > > > > make install DESTDIR= <give your path> > > > > > > > > I compiled without video. > > > > Hope this helps. > > > > > > > > -sanil. > > > > > > > > On 9/11/07, Cheng-Yen Lin < [EMAIL PROTECTED] > wrote: > > > > > > > > > Hi, > > > > > > > > > > I try to cross compile linphonec fro arm-linux . First of all I > > > > > successfully cross compiled libosip2( 2.2.2), speex(1.2), > > > > > readline(5.1), ncurses(5.6). Then I configure linphone: > > > > > > > > > > ./configure --with-osip=/root/nthu/arm > > > > > -2007q1/arm-none-linux-gnueabi/ > > > > > --with-readline=/root/nthu/arm-2007q1/arm-none-linux-gnueabi/ --pref > > > > > ix=/root/nthu/arm-2007q1/arm-none-linux-gnueabi/ > > > > > --host=arm-none-linux-gnueabi > > > > > SPEEX_CFLAGS="-I/root/nthu/arm-2007q1/arm-none-linux-gnueabi/include" > > > > > SPEEX_LIBS > > > > > ="-L/root/nthu/arm-2007q1/arm-none-linux-gnueabi/include -lspeex" > > > > > --disable-glib --disable-video --enable-gtk_ui=no > > > > > > > > > > Then make, everything goes fine but while I execute "linphonec" on > > > > > my ARM board, It has the following > > > > > error message: > > > > > % > > > > > cd: 1: can't cd to /root/nthu/linphone-1.7.0/console > > > > > eval: 1: arm-none-linux-gnueabi-gcc: not found > > > > > % > > > > > > > > > > it seems the shared library problem, so I re-configure linphone > > > > > with the following > > > > > > > > > > ./configure CFLAGS=-static > > > > > --with-osip=/root/nthu/arm-2007q1/arm-none-linux-gnueabi/ > > > > > --with-readline=/root/nthu/arm-2007q1/arm-none-linux-gnueabi/ --pref > > > > > ix=/root/nthu/arm-2007q1/arm-none-linux-gnueabi/ > > > > > --host=arm-none-linux-gnueabi > > > > > SPEEX_CFLAGS="-I/root/nthu/arm-2007q1/arm-none-linux-gnueabi/include" > > > > > SPEEX_LIBS > > > > > ="-L/root/nthu/arm-2007q1/arm-none-linux-gnueabi/include -lspeex" > > > > > --disable-glib --disable-video --enable-gtk_ui=no > > > > > > > > > > I add -static to the cflags, but while execution still has the > > > > > following error message: > > > > > > > > > > % > > > > > ./linphonec: error while loading shared libraries: > > > > > libreadline.so.5: cannot open > > > > > shared object file: No such file or directory > > > > > % > > > > > > > > > > I try to compile readline with the "-static" option, but still not > > > > > work. I stack for a while @@ > > > > > > > > > > Can someone know how to solve this? any advice will be great help, > > > > > thanks!!! > > > > > > > > > > _______________________________________________ > > > > > Linphone-users mailing list > > > > > [email protected] > > > > > http://lists.nongnu.org/mailman/listinfo/linphone-users > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > Linphone-users mailing list > > > [email protected] > > > http://lists.nongnu.org/mailman/listinfo/linphone-users > > > > > > > > > > > > -- > > > > Today is most important. > > _______________________________________________ > > Linphone-users mailing list > > [email protected] > > http://lists.nongnu.org/mailman/listinfo/linphone-users > > > > >
_______________________________________________ Linphone-users mailing list [email protected] http://lists.nongnu.org/mailman/listinfo/linphone-users
