I can’t use the authentication name as the user ID with Megapath. They are not the same. A quick Google search of SIP username and authentication name seems to indicate that they can be different values. Does Linphone only work if User ID and Authentication name are the same?
From: Lorrin <[email protected]<mailto:[email protected]>> Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Date: Friday, July 18, 2014 at 12:47 PM To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: Re: [Linphone-users] Help with configuration Have you tried using Authorization name as your SIP identity, e.g. sip:autorizationname@provider? The user id could be just the Megapath ID and as such not important for a SIP account.. On 18.07.2014 20:19, Bryant Bunderson wrote: Thank you for the response. The creds I used are randomly generated and shouldn’t be valid. I have looked at site similar to the one you mentioned but I haven’t found one that shows how to use both a User ID and an Authorization Name too. Does Linphone support that? From: Lorrin <[email protected]<mailto:[email protected]>> Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Date: Thursday, July 17, 2014 at 11:57 PM To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: Re: [Linphone-users] Help with configuration A quick warning first, never post your actual password public like this! This should be quite obvious. Unless its a dummy password. If not, quickly go and change it asap. As for the actual question, a quick Google search revels plenty of information like this: http://www.callcentric.com/support/device/linphone/desktop Regards On 18.07.2014 00:08, Bryant Bunderson wrote: Guys, I want to use LinPhone with my SIP provider Megapath but I don’t know how to configure the account. This is how I configure the account in Bria. User ID: 123456_1234567890_7890 Domain: megapathvoice.com Password: ZXspFsRUK8ub56v6 Display name: Megapath Authorization name: 1234567890 Register with domain and receive calls: checked Send outbound via: Proxy Proxy address: ut01-hnt.megapathvoice.net When I configure Linphone, I don’t know where to set the Authorization name. Thanks in advance for any help. _______________________________________________ Linphone-users mailing list [email protected]<mailto:[email protected]>https://lists.nongnu.org/mailman/listinfo/linphone-users _______________________________________________ Linphone-users mailing list [email protected]<mailto:[email protected]>https://lists.nongnu.org/mailman/listinfo/linphone-users
_______________________________________________ Linphone-users mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/linphone-users
