Thanks, for your reply Russell. I have tried changing the DTMF's sending method to 'RFC 2833' and 'SIP Info', but still cannot press the on-screen dialing pad:
Is there anything else that can be changed to get this to work? Regards, On 27 July 2018 at 17:30, A John <[email protected]> wrote: > LINPHONE > ---------- Forwarded message ---------- > From: Russell Treleaven <[email protected]> > Date: 27 July 2018 at 17:02 > Subject: Re: [Linphone-users] Linphone Desktop 4.1.1 - Qt5.9.0 > To: [email protected] > > > I think you mean that dtmf https://en.wikipedia.org/wiki/ > Dual-tone_multi-frequency_signaling is not being received and understood > by your peer. > > look at linphone->preferences->network->transport->DTMF's sending method > RFC 2833 is typical but your peer may require SIP Info. > > > > On Fri, Jul 27, 2018 at 11:15 AM, A John <[email protected]> wrote: > >> Hi, >> >> I have successfully called and connected to a SIP number, but when >> prompted to enter a number on the keypad, the keypad does not respond to >> the numbers I have entered. >> >> Please advise? >> >> -- >> Regards, >> >> Alex John >> >> _______________________________________________ >> Linphone-users mailing list >> [email protected] >> https://lists.nongnu.org/mailman/listinfo/linphone-users >> >> > > > -- > Sincerely, > > Russell Treleaven > sip:[email protected];transport=tcp > > > _______________________________________________ > Linphone-users mailing list > [email protected] > https://lists.nongnu.org/mailman/listinfo/linphone-users > > > > > -- > Regards, > > Alex John > -- Regards, Alex John
_______________________________________________ Linphone-users mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/linphone-users
