On Thu, May 21, 2020 at 03:54:57PM +0200, Samuel Suther wrote: > I have trouble to get linphone to work behind fritz.box router. > > FritzBox Cable 6591 > SIP-Provider: easybell (Trunk) > Setup phone-Number in Fritz.Box, and setup Linphone to use this
I have a Fritz.Box 7530 which is working with linphone (and also a DECT 'phone configured for the same sip registrar). I don't understand "setup Linphone to use this": shouldn't you be setup to use the sip server? But maybe your Fritz box has an internal sip server? I am a bit rusty on all of this, but if no one else can help I will try and refresh my memory. > If I open Fritz.Box setting and set Fritz.Box-Portforwarding this way, I don't think you need to use port forwarding if you use STUN. That's a setting under Preferences->Network settings in Linphone. I have the SIP/UDP port set to 5080 which I think I choose because I have another sip device using 5060, but my memory may be wrong. Audio RTP/UDP = 7078 and Video RTP/UDO = 9078 which I think were defaults > that the IP of my PC where my Linphone runs is directly connected to the > internet, I got sound. That would perhaps be because you needed STUN when the firewall was active. > So the question is, which port has to be forwarded to make Linphone > work with audio... and why does there be needed an port-forwarding, if > at least Linphone connect to the Fritz.Box internal Sip, instead > directly to easybell. I think that answer is that you don't (need any port forwarding). I didn't think the Fritz box has a sip registrar. I don't know about easybell, but if you have the easybell account set up in Linphone under Preferences->Manage SIP Accounts, and you have a stun server set up, then I think it should all work. ael _______________________________________________ Linphone-users mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/linphone-users
