Hey Dennis and Germán, thanks for your help, the reg_route paramter was the right one, now the realm isnt resolved by the belle-sip
BR René Am 18.08.21 um 08:23 schrieb German Cancio: > Dennis, René, > > Isn’t that achieved with the reg_route config entry in the proxy section? Try > something like > > reg_route=sip:pbx.domain.tld;transport=tls > > This should force all outgoing requests to go through pbx.domain.tld. > > Cheers, Germán > > >> On 18 Aug 2021, at 08:08, Rene Kockisch <[email protected]> wrote: >> >> Hi Dennis, >> >> the linphonerc proxy and auth section is list below: >> >> [auth_info_1] >> username=user1 >> userid=user1 >> ha1=cb4a74c5669197f91b09017781d9b64d >> realm=x100 >> domain=pbx.domain.tld >> algorithm=MD5 >> >> [proxy_0] >> reg_proxy=<sip:pbx.domain.tld:5081;transport=tls> >> reg_identity=sip:rot18@x100 >> contact_parameters=message-expires=604800 >> quality_reporting_enabled=0 >> quality_reporting_interval=0 >> reg_expires=3600 >> reg_sendregister=1 >> publish=1 >> avpf=-1 >> avpf_rr_interval=1 >> dial_escape_plus=0 >> privacy=32768 >> push_notification_allowed=0 >> idkey=proxy_config_0vn3SUWIugJnuzP >> publish_expires=3600 >> nat_policy_ref=FR-gZc7Bj7OPJvM >> >> I can add realm to proxy section but the behavior is the same. The >> belle-sip try to resolv the realm. >> >> I also try to add the realm to the host file but the belle-sip doesnt >> use host file, the library use his own resolver maybe. >> >> >> >> BR >> René >> >> Am 17.08.21 um 21:10 schrieb Dennis Filder: >>> On Tue, Aug 17, 2021 at 09:30:57AM +0200, Rene Kockisch wrote: >>> >>>> I'm trying to use linphone for our PBX but we run in a issue. I use >>>> Desktop 4.2.5 - Qt5.14.2 Core 4.4.19 on Windows 10 and the config use a >>>> Domain to register and a realm for Login mech. But the linphone try to >>>> resolv the realm as a domain, how can I told linphone to not resolv the >>>> login realm? >>>> >>>> The config is as follow: >>>> >>>> sip-adress: sip:user1@x100 >>>> sip-serveradress: sip:pbx.domain.tld;transport=udp >>>> >>>> The registration works and I'm logged in with my user but in case I want >>>> to make a outbound call the belle-sip try to resolve the realm, why? >>> >>> From looking at the source code I believe to authenticate against a >>> realm you have to configure it manually in the linphonerc file under >>> section [proxy] as that setting is not exposed through the GUI. The >>> file should be at >>> "C:\Users\<UserName>\AppData\Local\linphone\linphonerc". The >>> recognized configuration keys for that section are (default values in >>> parentheses): >>> >>> avpf >>> avpf_rr_interval (5) >>> conference_factory_uri >>> contact_parameters >>> contact_uri_parameters >>> depends_on >>> dial_escape_plus (0) >>> dial_prefix >>> idkey >>> nat_policy_ref >>> privacy >>> publish (0) >>> publish_expires (-1) >>> push_notification_allowed (0) >>> quality_reporting_collector >>> quality_reporting_enabled (0) >>> quality_reporting_interval (0) >>> realm >>> refkey >>> reg_expires (3600) >>> reg_identity >>> reg_proxy >>> reg_route >>> reg_sendregister (1) >>> >>> In reg_proxy you have to use the (resolvable) hostname of the proxy >>> and in realm the unresolvable realm name. At least that's my >>> understanding. >>> >>> Regards. >>> >>> _______________________________________________ >>> Linphone-users mailing list >>> [email protected] >>> https://lists.nongnu.org/mailman/listinfo/linphone-users >>> >> >> >> _______________________________________________ >> Linphone-users mailing list >> [email protected] >> https://lists.nongnu.org/mailman/listinfo/linphone-users > > > _______________________________________________ > Linphone-users mailing list > [email protected] > https://lists.nongnu.org/mailman/listinfo/linphone-users > -- questnet GmbH Byhlener Str. 1 03044 Cottbus Tel: 0355 / 12 16 400 41 E-Mail: [email protected] _______________________________________________ Linphone-users mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/linphone-users
