Hello Leif and all, during last week end, i have installed UBUNTU 6.10, right some days after some test with UBUNTU 6.06. Now, the main problem for me is to install my network (internet connection), using my Dialup 56 k modem. Unfortunately in my town,the ADSL is possible only via WIFI and i'm making some consideration, regarding costs and so on. At the moment the only way to update my UBUNTU 6.10, is the 56 k modem. I don't know why, because with previous version (6.06) the network setting wasn't so trouble and i made a good connection with it, easily. Now after 2 or 3 days of tests, reading on forums and so on, sending on "TERMINAL" some command, the modem starts, but it not connect. I have test also some modifies on the .conf file, like ATX3, but i still without connection. I'm quite sure that on this reflector, there is someone that could help me,resolving this stupid problem, while i need to connect whit this preistorical way. My modem is an external 56 K US ROBOTICS. Untill the solution of this problem, i could not to proceed whit new LINRAD installation, under OSS. Thank you in advance.
Francesco,IK2DDR -----Messaggio originale----- Da: Linrad mailinglist [mailto:[EMAIL PROTECTED] conto di Leif Asbrink Inviato: martedì 23 gennaio 2007 19.07 A: Linrad mailinglist Oggetto: [linrad] Re: Linrad-02.22 Hello Francesco, > about Linrad-02.22, for example, i'm not able to run with it (as i do with > 2.20 and 2.21) the > recorded files (like FRH0135 for example and others)because when i push the > "A" key it crash. > This is a minus problem. OK. I can reproduce it now:-) I always have a second file name on the line to have separate parameters for each recording. This will be an easy fix - but since I leave in less than 24 hours I can not fix it immediately.... > The main problem on my new UBUNTU installation (with ALSA)is that i'm not > able to obtain the > filter calibration, although i have copied into the LINRAD folder the > "DSP***" files, that i'm > using on Mandrake installation. You must use the same settings for the soundcard. Same number of channels, same sampling speed and mode (I/Q or real-valued data) Compare the par_userint files to see what differs between your two installations. 73 Leif / SM5BSZ ############################################################# This message is sent to you because you are subscribed to the mailing list <linrad@antennspecialisten.se>. To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> To switch to the INDEX mode, E-mail to <[EMAIL PROTECTED]> Send administrative queries to <[EMAIL PROTECTED]> ############################################################# This message is sent to you because you are subscribed to the mailing list <linrad@antennspecialisten.se>. To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> To switch to the INDEX mode, E-mail to <[EMAIL PROTECTED]> Send administrative queries to <[EMAIL PROTECTED]>