Hi Leif. The vers. 02-31 has resolved the problem of delay in the keyboard input and also correct level of the noise-floor in db-bluscale; ok in Win/svga/ X11. I have found a problem in on-line modify parameters in Win/svga/ X11 During normal operation "A" and after have pressed "X" they could be varied only the parameters of the first panel. After the 1st enter-key return directly in normal operation "A". Thank you for the hard job.
Ermanno / ik7ezn ---------- Initial Header ----------- >From : "Leif Asbrink" [EMAIL PROTECTED] To : "[EMAIL PROTECTED]" [EMAIL PROTECTED] Cc : Date : Sat, 5 May 2007 18:31:57 +0200 Subject : Linrad-02.31 > Hi All, > > Linrad-02.31 is now uploaded. > > The reason why 02-29 and 02-30 behave badly when large > (and slow) transforms are selected for fft1 or fft2 > (or both) is that the menu thread now has a loop that > sleeps most of the time, but that occasionally wakes > up to check that the input is still running. > This is motivated by the support for SDR-IQ and SDR-14 > that might become disconnected. Rather than just silently > hang, Linrad will now show a message about the error > in the lower left corner of the screen. > > The loop that looks for missing input checks whether > a keyboard key is pressed. That was a mistake, that > check will steal the characters in case the delay > between the key press and the handling thereof is > not very low (the delay is the time for fft1 or one > slice of fft2) > > The check is not really needed because the only keypress > that was intended to work is ESC, but it could be a good > idea to allow keyboard testing from any thread so I > have changed the routine test_keyboard rather than > removed the statement. Under error conditions due to > missing input Linrad has to be killed with the mouse > in the "kill application" box of X11 or Windows. > One then has to press ctlC when running under X11. > With svgalib the exit has to be with ctlC. > > The next version will (hopefully) allow an orderly exit > with ESC or X. No hurry, SDR-14 or SDR-IQ do not stop > working when cables are kept connected. > > I uploaded 02-31 immediately after fixing the keyboard > input error since it might limit the usefulness of > the latest version. > > 73 > > Leif / SM5BSZ > > > > > > ------------------------------------------------------ Leggi GRATIS le tue mail con il telefonino i-modeĀ di Wind http://i-mode.wind.it/ ############################################################# This message is sent to you because you are subscribed to the mailing list <linrad@antennspecialisten.se>. To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> To switch to the INDEX mode, E-mail to <[EMAIL PROTECTED]> Send administrative queries to <[EMAIL PROTECTED]>