Hello Leif, First of all, thanks for the correction in the I/Q calibration of linrad-02.34. Everything is working fine now with your patch.
I also have a question related to the RX2500 and soundcards sampling at 192 Khz: The Oxygen HD CMI 8788 chipset from C-Media allows sampling at 192Khz and seems to be supported by OSS. A review of a soundcard using this chipset can be found at http://www.elitebastards.com/cms/index.php?option=com_content&task=view&id=278&Itemid=27&limit=1&limitstart=0 This card is sold for 70 pound in the uk by http://www.wired2fire.co.uk/product_info.php?cPath=9&products_id=15720 Before I give it a try I would like to get your advise about the modification that would be required in the RX2500. I assume that the audio section of the RX2500 willl require some modifications in the anti-alias filter (and maybe in other parts of the receiver also ). Could you confirm this assumption and if so, give us some guidelines as how to proceed. Is it possible to make these modifications without the help of sophisticated measurement instruments? Thanks in advance and best 73 Pierre /ON5GN ############################################################# This message is sent to you because you are subscribed to the mailing list <linrad@antennspecialisten.se>. To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> To switch to the INDEX mode, E-mail to <[EMAIL PROTECTED]> Send administrative queries to <[EMAIL PROTECTED]>