Thanks, I was able to update the /etc/chandev.conf with the second ctc then issue rcchandev reload to add the device. phil
"Post, Mark K" wrote: > > Phil, > > You'll have to use the chandev interface to get it to recognize the new > device dynamically, and then update /etc/chandev.conf to make the change > "permanent" for future system reboots. I would guess (although I don't > know) that YaST would handle this for you. I would try that first. Again, > without a 2.4 system to check, try: > yast->System administration->Network configuration->Network base > configuration > > Make sure you activate the device before you leave that screen. I tend to > forget it. > > Mark Post > > -----Original Message----- > From: Philip J. Tully [mailto:[EMAIL PROTECTED]] > Sent: Monday, February 04, 2002 11:41 AM > To: [EMAIL PROTECTED] > Subject: Question: 2nd CTC on a SuSE 2.4 kernel > > Hello all,. > > I was wondering how to add a second CTC definition to a SuSE 2.4 > system. The vctc is defined and configured in the virtual machine but > the interface is not recognized. > > Phil Tully