Surprise, surprise! I got thru the network stuff. Need to make changes because of what was said in an earlier note about different subnet, but at least something is happening.
Thanks all. -----Original Message----- From: Post, Mark K [mailto:[EMAIL PROTECTED]] Sent: Wednesday, April 24, 2002 2:39 PM To: [EMAIL PROTECTED] Subject: Re: Subject: Kernel panic: VFS: Unable to mount root fs on 01: 00 Jill, Ah. Try a 3215. I think you'll have better luck. Mark Post -----Original Message----- From: Jill Grine [mailto:[EMAIL PROTECTED]] Sent: Wednesday, April 24, 2002 2:20 PM To: [EMAIL PROTECTED] Subject: Re: Subject: Kernel panic: VFS: Unable to mount root fs on 01: 00 This is what I coded in DIRECT: CONSOLE 009 3270 A -----Original Message----- From: Post, Mark K [mailto:[EMAIL PROTECTED]] Sent: Wednesday, April 24, 2002 1:52 PM To: [EMAIL PROTECTED] Subject: Re: Subject: Kernel panic: VFS: Unable to mount root fs on 01: 00 Jill, Glad to hear you're making some progress. What console type do you have defined for the Linux/390 guest? Mark Post -----Original Message----- From: Jill Grine [mailto:[EMAIL PROTECTED]] Sent: Wednesday, April 24, 2002 10:43 AM To: [EMAIL PROTECTED] Subject: Re: Subject: Kernel panic: VFS: Unable to mount root fs on 01: 00 Whoa! I am finally getting somewhere. I tried the tape IPL again, but left one (two) thing(s) different. The PARM card had "" at the end, and before I had deleted it. Maybe I needed to keep it? Also using new files from IUCV URL Mark Post recommended. I got far enough to get the prompt for network device, but the system won't accept console input. I remember there was discussion about this, so I will search the archives to see what I did wrong with this. At least there is hope! Thanks all. (Can't dowload directly to VM because it isn't defined to the network for outside access.)
