The following error occurs: qeth: Trying to use card with devnos 0xE0C/0xE0D/0xE0E qeth: sense data available on write channel. qeth: irb: 00 c2 40 17 00 af ff 58 02 00 00 22 00 80 00 00 qeth: irb: 01 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 qeth: sense data: 80 00 00 00 00 00 00 01 00 00 01 00 00 00 00 00 qeth: sense data: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 qeth: unit check/exception in write_handler (irq 0x2, devstat 0x02, schstat 0x00, rqparam 0x1004) qeth: IDX_ACTIVATE(wr) on write channel irq 0x2: timeout qeth: There were problems in hard-setting up the card.
James Johnson Email: [EMAIL PROTECTED] Systems Programmer Voice: 660-543-8065 Central Missouri State University Fax: 660-543-8123 ----- Original Message ----- From: "Post, Mark K" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, August 28, 2002 6:55 PM Subject: Re: mirco code level of gigabit ethernet card > What symptoms are you seeing with the card? > > Mark Post > > -----Original Message----- > From: James Johnson [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, August 28, 2002 7:56 PM > To: [EMAIL PROTECTED] > Subject: mirco code level of gigabit ethernet card > > > I can not get our gigabit ethernet card to work with Linux. I suspect the > problem > is with the micro code on the card. The cards works with VM TCPIP but not > Linux. > > Our card is at level 0422. If you are using a gigabit card what is its micro > code level? > > Thanks. > > James Johnson Email: [EMAIL PROTECTED] > Systems Programmer Voice: 660-543-8065 > Central Missouri State University Fax: 660-543-8123 >
