Hi, We're trying to set up a SLES7 on z/VM Version 4 Release 2.0. We use CTC as network connection to VM.
We're implementing the methods described in the Redbook SG24-6824-00 'Large Scale Linux Deployment' to build a basevolume/guestvolume system. The bind mounting works fine... We just have a problem with some kernel modules: net-pf-3 and net-pf-9 They can not be found when ipl'ing the system. We tried to put them 'off' in /etc/modules.conf but still there was a problem with the network As you can see in the log beneath, the /proc/net/dev cannot be found. Thus the network cannot be initialized .... Our question is: what causes what? Are the missing modules (net-pf-x) the cause of our network problems or is something else wrong?? If you now anything that can help, let us know ------Output during booting ---- IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver modprobe: modprobe: Can't locate module net-pf-3 modprobe: modprobe: Can't locate module net-pf-9 CTC driver Version: 1.51 initialized ctc0: read: ch 0800 (irq 0001), write: ch 0801 (irq 0002) proto: 0 modprobe: modprobe: Can't locate module net-pf-3 modprobe: modprobe: Can't locate module net-pf-9 Warning: cannot open /proc/net/dev (No such file or directory). Limited output. ...ctc0: connected with remote side ...done Setting up routing (using /etc/route.conf)/etc/init.d/rc3.d/S07route: /proc/net/dev: No such file or directory /etc/init.d/rc3.d/S07route: /dev/fd/62: No such file or directory ..done /proc/net/route: No such file or directory ---------------------------------- Thx in advance Davy Michiels Stijn Eulaerts Group T Leuven Engineering School www.groupt.be