It's working now... did an insmod qdio followed by an insmod qeth with my parameters, and everything worked like it was supposed to.
~ Daniel > -----Original Message----- > From: Jarboe, Daniel > Sent: Monday, December 30, 2002 2:10 PM > Subject: Re: Problem setting up qdio > > > Thanks Mark, some progress... > > # depmod -a > # modprobe qeth > Warning: loading /lib/modules/2.4.9-38tape/kernel/drivers/s390/qdio.o > will taint the kernel: no license > Warning: loading > /lib/modules/2.4.9-38tape/kernel/drivers/s390/net/qeth.o will > taint the > kernel: no license > /lib/modules/2.4.9-38tape/kernel/drivers/s390/net/qeth.o: init_module: > No such device > Hint: insmod errors can be caused by incorrect module parameters, > including invalid IO or IRQ parameters > /lib/modules/2.4.9-38tape/kernel/drivers/s390/net/qeth.o: insmod > /lib/modules/2.4.9-38tape/kernel/drivers/s390/net/qeth.o failed > /lib/modules/2.4.9-38tape/kernel/drivers/s390/net/qeth.o: insmod qeth > failed > > > In /var/log/messages > Dec 30 13:55:56 tcsl kernel: qeth: Trying to use card with devnos > 0xF800/0xF801/0xF802 > Dec 30 13:55:57 tcsl kernel: qeth: received an IDX TERMINATE on irq > 0x2910/0x2911 with cause code 0x22 -- try another portname > Dec 30 13:55:57 tcsl kernel: qeth: There were problems in > hard-setting > up the card. > Dec 30 13:55:57 tcsl kernel: qeth: Trying to use card with devnos > 0xF804/0xF805/0xF803 > Dec 30 13:55:58 tcsl kernel: qeth: received an IDX TERMINATE on irq > 0x2914/0x2915 with cause code 0x22 -- try another portname > Dec 30 13:55:58 tcsl kernel: qeth: There were problems in > hard-setting > up the card. > > > Hrm, meaning the z/OS LPAR using the OSA-E is not using > OSAXPRE2 for the > portname? Would there be anything else that could cause this error? > > ~ Daniel > > > > > -----Original Message----- > > From: Mark Post > > Sent: Monday, December 30, 2002 1:35 PM > > Subject: Re: Problem setting up qdio > > > > > > Daniel, > > > > Try doing a modprobe instead of an insmod. It could be that > > the qdio.o > > module provides those symbols. The insmod command doesn't do > > any dependency > > checking or loading of prerequisite modules. > > > > Mark Post > > > > -----Original Message----- > > From: Linux on 390 Port On Behalf Of > > Daniel Jarboe > > Sent: Monday, December 30, 2002 9:39 AM > > Subject: Problem setting up qdio > > > > > > RH 7.2 in an LPAR. I was working on adding an additional network > > interface (currently using a CTC gateway). I'm getting unresolved > > symbols with the insmod qeth. > > > > 2.4.9-38tape, used kernel-oco-2.4.9-38-1.s390.rpm found in > > kernel-oco-2.4.9-38-1.s390.tar.gz > > > > > > # cat /etc/chandev > > ctc0,0x1370,0x1371,0,3 > > noauto;qeth0,0xf800,0xf801,0xf802;add_parms,0x10,0xf800,0xf802 > > ,portname: > > OSAXPRE2 > > > > > > # depmod -a > > # insmod qeth > > Using /lib/modules/2.4.9-38tape/kernel/drivers/s390/net/qeth.o > > /lib/modules/2.4.9-38tape/kernel/drivers/s390/net/qeth.o: unresolved > > symbol qdio_initialize_Rsmp_6a92b878 > > /lib/modules/2.4.9-38tape/kernel/drivers/s390/net/qeth.o: unresolved > > symbol qdio_activate_Rsmp_50e1a39f > > /lib/modules/2.4.9-38tape/kernel/drivers/s390/net/qeth.o: unresolved > > symbol do_QDIO_Rsmp_d275b412 > > /lib/modules/2.4.9-38tape/kernel/drivers/s390/net/qeth.o: unresolved > > symbol qdio_cleanup_Rsmp_18e03ca4 > > /lib/modules/2.4.9-38tape/kernel/drivers/s390/net/qeth.o: > > Hint: You are trying to load a module without a GPL > compatible license > > and it has unresolved symbols. Contact the module > supplier for > > assistance, only they can help you. > > > > # insmod qeth qeth1,0xf800,0xf801,0xf802,portname:OSAXPRE2 > > Using /lib/modules/2.4.9-38tape/kernel/drivers/s390/net/qeth.o > > /lib/modules/2.4.9-38tape/kernel/drivers/s390/net/qeth.o: unresolved > > symbol qdio_initialize_Rsmp_6a92b878 > > /lib/modules/2.4.9-38tape/kernel/drivers/s390/net/qeth.o: unresolved > > symbol qdio_activate_Rsmp_50e1a39f > > /lib/modules/2.4.9-38tape/kernel/drivers/s390/net/qeth.o: unresolved > > symbol do_QDIO_Rsmp_d275b412 > > /lib/modules/2.4.9-38tape/kernel/drivers/s390/net/qeth.o: unresolved > > symbol qdio_cleanup_Rsmp_18e03ca4 > > /lib/modules/2.4.9-38tape/kernel/drivers/s390/net/qeth.o: > > Hint: You are trying to load a module without a GPL > compatible license > > and it has unresolved symbols. Contact the module > supplier for > > assistance, only they can help you. > > > > > > Any ideas? > > Thanks, > > ~ Daniel > > > ----------------------------------------------------------------------- This message is the property of Time Inc. or its affiliates. It may be legally privileged and/or confidential and is intended only for the use of the addressee(s). No addressee should forward, print, copy, or otherwise reproduce this message in any manner that would allow it to be viewed by any individual not originally listed as a recipient. If the reader of this message is not the intended recipient, you are hereby notified that any unauthorized disclosure, dissemination, distribution, copying or the taking of any action in reliance on the information herein is strictly prohibited. If you have received this communication in error, please immediately notify the sender and delete this message. Thank you.
