I found the answer to my problem in the OSA redbook.
Dynamically added addresses can not be used for READ or WRITE devices, but
they can be used for DATAPATH devices.
Just sharing the answer.
Dave Myers
To: Linux on 390 Port
<[EMAIL PROTECTED]>
02/04/2003 cc:
11:12 AM Subject: OSA EXPRESS - not working for
Dynamically Activated New Addresses(Document link: Dave
Myers)
I have a WORKING OSA EXPRESS.
I have been using it for 5 linux tcpip stacks (port sharing)
This has worked fine.
I originally had only 16 addresses gen'd in my HCD and added 48 more via
DYNAMIC ACTIVATION.
The new addresses show up as available to zVM....but when I try to use the
new address in newly
cloned Linux stacks... I get the errors below.
I've tried IPLing VM and also I configured the CHPID offline/online to the
zVM Lpar...but no luck.
Any ideas?
(The 411-413 real addresses were added via HCD dynamic activate)
OSA 0411 ATTACHED TO LINUXT5 0F04
OSA 0412 ATTACHED TO LINUXT5 0F05
OSA 0413 ATTACHED TO LINUXT5 0F06
(Here are linux qeth errors)
Feb 4 12:54:31 prvdlnx02 kernel: qeth: Trying to use card with devnos
0xF04/0xF05/0xF06
qeth: IDX_ACTIVATE(rd) on read channel irq 0x1: timeout
qeth: There were problems in hard-setting up the card.
Feb 4 12:54:32 prvdlnx02 kernel: qeth: IDX_ACTIVATE(rd) on read channel
irq 0x1: timeout
Feb 4 12:54:32 prvdlnx02 kernel: qeth: There were problems in
hard-setting up the card.
qdio: QDIO base support version 2 ($Revision: 1.120.2.1 $/$Revision:
1.56.2.1 $): module removed
Tia
Dave Myers
Denver Solutions Group
Senior Systems Engineer
Office Phone: (303) 996-7112
Cellular Phone: (303) 619-0782
Home Office: (303) 948-0027
Fax: (303) 706.1713
e-mail: [EMAIL PROTECTED]
