You're correct. The ability to dynamically add/remove DASD is in the 2.4 kernels, not the 2.2 kernels. You'll need to update your parmfile in /boot, and re-run the silo command. Then, reboot.
Mark Post -----Original Message----- From: Janakiraman S , Tidel Park - Chennai [mailto:[EMAIL PROTECTED] Sent: Monday, March 17, 2003 7:21 AM To: [EMAIL PROTECTED] Subject: Re: add new dasds oops..failed to mention this..my kernel is 2.2.16. when i do echo "add device" it says "dasd:unknown command add device range=350-351" my version of kernel doesnot support this command i guess. regds. janaks. -----Original Message----- From: Klaus Bergmann [mailto:[EMAIL PROTECTED] Sent: Monday, March 17, 2003 5:41 PM To: [EMAIL PROTECTED] Subject: Re: add new dasds >We recently installed Suse 7.0 in our H30 machine (lpar mode). During >installation we specified only two dasds using the "insmod dasd" command. >But now we want to add some more dasds to the system. How to do this. echo "add device range=devno-range ">>/proc/dasd/devices Freundliche Grüsse, Klaus Bergmann