Re: Change dinamically the /proc/dasd/devices.

["Antônio Pires de Castro Jr."]

Sergey Korzhevsky wrote:

echo "add device range=0bb2" >> /proc/dasd/devices





       WBR, Sergey



"Anttnio Pires de Castro Jr." <[EMAIL PROTECTED]>
Sent by: Linux on 390 Port <[EMAIL PROTECTED]>
03.11.2003 15:32
Please respond to Linux on 390 Port
       To:     [EMAIL PROTECTED]
       cc:
       Subject:        Change dinamically the /proc/dasd/devices.
Hi,

How can I change dinamically the /proc/dasd/devices to add a new
dasd without reboot my machine.
I tried the following command, but it didn't work
echo "0bb2(ECKD) at ( 94: 36) is dasdj      : active at blocksize: 4096,
601020 blocks, 2347 MB" >> /proc/dasd/devices
thanks in advanced,

--
Antonio Pires
Suporte Tecnico - AGANP

thanks for your reply, it works, but I can't format it:

[EMAIL PROTECTED] root]# more /proc/dasd/devices
...
0bb2(none) at ( 94: 40) is dasdk      : unknown
0bb3(none) at ( 94: 44) is dasdl      : unknown
[EMAIL PROTECTED] root]# /sbin/dasdfmt -b 4096 -f /dev/dasdk
/sbin/dasdfmt: error opening device /dev/dasdk: No such device
[EMAIL PROTECTED] root]# /sbin/dasdfmt -b 4096 -f /dev/dasdl
/sbin/dasdfmt: error opening device /dev/dasdl: No such device
[EMAIL PROTECTED] root]# /sbin/dasdfmt -b 4096 -l lnx16b -d cdl -f
/dev/dasdk
/sbin/dasdfmt: error opening device /dev/dasdk: No such device
How can I format this new dasds???

thanks,

--
   Antonio Pires
Suporte Tecnico - AGANP