I am trying to add a QDIO guest lan to replace the IUCV connection between a firewall server and a web server. The firewall server has a 3172 connection to the real network. I tried to mimic the configuration from another server I have that has a claw device to the network and a guest lan to our VM based services. This new firewall server will eventually have 2 guest lans, one being to the VM services and the other to its collection of linux servers.
When I ipl the firewall server I get nasty messages in the console log. Am I doing something wrong with this configuration? Are QDIO guest lans incompatible with real LCS devices? /Thomas Kern /301-903-2211 Console Log: qeth: Trying to use card with devnos 0xE04/0xE05/0xE03 qeth: received an IDX TERMINATE on irq 0x7/0x8 with cause code 0x22 -- try another portname qeth: received an IDX TERMINATE on irq 0x7/0x8 with cause code 0x22 -- try another portname qeth: There were problems in hard-setting up the card. qeth: Trying to use card with devnos 0xE00/0xE01/0xE02 qeth: received an IDX TERMINATE on irq 0x9/0xA with cause code 0x22 -- try another portname qeth: received an IDX TERMINATE on irq 0x9/0xA with cause code 0x22 -- try another portname qeth: There were problems in hard-setting up the card. debug: unregistering qeth_setup /etc/modules.conf: alias eth0 lcs alias iucv0 netiucv alias iucv1 netiucv options netiucv iucv=lnxsss1:lnxsss2 alias ctc0 ctc options ctc setup='"0,0xf00,0xf01,ctc0"' alias eth1 qeth alias eth2 qeth /etc/chandev.conf: chandev=noauto,lcs0,0x39eo,0x39e1,0,0,1,1 noauto add_parms,0x10,0xe00,0xe02,portname:VMLAN00 qeth1,0xe00,0xe01,0xe02,0,0 add_parms,0x10,0xe03,0xe05,portname:VMLAN02 qeth2,0xe03,0xe04,0xe05,0,0 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
