Umm, that looks bad. If you have your console spooled, send that to me off-list. If you don't have your console spooled, do it again, and send it to me off-list. I'll report back what I think the problem might be.
Mark Post -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Steve Gentry Sent: Friday, July 09, 2004 2:42 PM To: [EMAIL PROTECTED] Subject: Re: slackware 9.1 [EMAIL PROTECTED]:~5 lsmod Module Size Used by reiserfs 243712 0 (unused) jfs 188472 0 (unused) ext3 73168 0 (unused) jbd 52056 0 [ext3] dasd_fba_mod 5340 1 (initializing) dasd_diag_mod 5996 0 (autoclean) (unused) dasd_eckd_mod 57896 1 (initializing) dasd_mod 51036 3 [dasd_fba_mod dasd_diag_mod dasd_eckd_mod] qeth 149528 1 qdio 38224 1 [qeth] [EMAIL PROTECTED]:~6 cat /proc/dasd/devices 0301(none) at ( 94: 0) is dasda : accepted 0302(none) at ( 94: 4) is dasdb : unknown 0303(none) at ( 94: 8) is dasdc : unknown 0304(none) at ( 94: 12) is dasdd : unknown 0305(none) at ( 94: 16) is dasde : unknown 0306(none) at ( 94: 20) is dasdf : unknown [EMAIL PROTECTED]:~7 "Post, Mark K" <[EMAIL PROTECTED]> Sent by: Linux on 390 Port <[EMAIL PROTECTED]> 07/09/2004 01:36 PM Please respond to Linux on 390 Port To: [EMAIL PROTECTED] cc: Subject: Re: slackware 9.1 Steve, That _should_ have happened automatically in /linuxrc, since you have DASD= specified in the parmfile. What does "cat /proc/dasd/devices" and "lsmod" show? Mark Post -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Steve Gentry Sent: Friday, July 09, 2004 2:32 PM To: [EMAIL PROTECTED] Subject: Re: slackware 9.1 Parm file below: <parm> root=/dev/ram0 ro ip=off ramdisk_size=40000 DASD=301-306 HOST=lnxrh03.vm.llic.com:eth0:10.140.1.43:1500 NETWORK=10.140.1.0:255.255.255.0:10.140.1.255:10.140.1.254 DNS=162.133.1.19:162.133.1.22 SEARCHDNS=llic.com:vm.llic.com CHANDEV=qeth0,0xE108,0xE109,0xE10A QETHPARM=add_parms,0x10,0xE108,0xE10A,portname:CHPID01 </parm> Yes they are in the parm file, yes they are attached. INSMOD doesn't sound familiar. Where should that be done? ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390