Ok.. Got it.. Thanks a bunch vmlinx5:/# pvscan pvscan -- reading all physical volumes (this may take a while...) pvscan -- inactive PV "/dev/dasd/0301/part1" is associated to unknown VG "system" (run vgscan) pvscan -- inactive PV "/dev/dasd/0302/part1" is associated to unknown VG "system" (run vgscan) pvscan -- inactive PV "/dev/dasd/0303/part1" is associated to unknown VG "system" (run vgscan) pvscan -- inactive PV "/dev/dasd/0304/part1" is associated to unknown VG "system" (run vgscan) pvscan -- inactive PV "/dev/dasd/0305/part1" is associated to unknown VG "system" (run vgscan) pvscan -- ACTIVE PV "/dev/dasd/0306/part1" of VG "lvmdata" [2.29 GB / 2.29 GB free] pvscan -- ACTIVE PV "/dev/dasd/0307/part1" of VG "lvmdat" [2.29 GB / 2.28 GB free] pvscan -- ACTIVE PV "/dev/dasd/0308/part1" of VG "lvmdat" [2.29 GB / 2.29 GB free] pvscan -- total: 8 [18.34 GB] / in use: 8 [18.34 GB] / in no VG: 0 [0]
Here is my pvscan zvmlinx5:/# mount /dev/lvmdat/vol1 /data mount: wrong fs type, bad option, bad superblock on /dev/lvmdat/vol1, or too many mounted file systems zvmlinx5:/# Above is my mount.... Any ideas Ralph > -----Original Message----- > From: Adam Thornton [mailto:[EMAIL PROTECTED] > Sent: Thursday, September 02, 2004 9:43 AM > To: [EMAIL PROTECTED] > Subject: Re: LVM under Debian > > On Thu, 2004-09-02 at 09:00, Noll, Ralph wrote: > > Did the pvcreate... It worked > Yeah, but you ran the create on the whole device, not on the > partition you would have gotten had you run fdasd -a on the > device. Do that and run it against /dev/dasd/XXXX/part1 > > > Did the pvscan .. The volumes of the pvcreate are not in there > > Yeah, because it's looking for the partition, not the device. > > Adam > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access > instructions, send email to [EMAIL PROTECTED] with the > message: INFO LINUX-390 or visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390