It's not a gigE. It's a 1000base-T. It can be configured as non-qdio. Any other thaughts? Gadi
-----Original Message----- From: David Boyes [mailto:[EMAIL PROTECTED] Sent: × 21/10/2004 22:03 To: [EMAIL PROTECTED] Cc: Subject: RE: SLES9 installation problem - again > When I chose option 3 I was asked for 3 devices. The devices > I gave (1200-1202) were not acceptable. > I don't want to use QDIO at this time. Non-qdio should be > supported according to evrything I've read. Not on the gigE cards. You don't have a choice -- if it's really a gigE card, then you must define it as a QDIO device and use QDIO. That's been the situation since the gigE cards were released. If you were using this card with the LCS driver on SLES8, it's not a gigE card. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390