vgscan -- ERROR "vg_read_with_pv_and_lv(): current PV" can't get data of volume group "lvmdata" from physical volume(s)
vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created vgscan -- WARNING: This program does not do a VGDA backup of your volume group vgchange -- no volume groups found Just installed another Debian under z/VM I've created an lvm I added it to fstab zvmlinx5:/etc# cat fstab # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> /dev/dasd/0300/part1 / ext2 errors=remount-ro 0 1 /dev/dasd/0308/part1 none swap sw 0 0 /dev/lvmdata/vol1 /data ext2 defaults 0 2 proc /proc proc defaults 0 0 /dev/fd0 /floppy auto user,noauto 0 0 /dev/cdrom /cdrom iso9660 ro,user,noauto 0 0 devfs /dev devfs defaults 0 2 zvmlinx5:/etc# When I re-boot Getting the below msg vgscan -- reading all physical volumes (this may take a while...) vgscan -- ERROR "vg_read_with_pv_and_lv(): current PV" can't get data of volume group "lvmdata" from physical volume(s) vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created vgscan -- WARNING: This program does not do a VGDA backup of your volume group vgchange -- no volume groups found Checking all file systems... fsck 1.27 (8-Mar-2002) fsck.ext2: No such file or directory while trying to open /dev/lvmdata/vol1 /dev/lvmdata/vol1: The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> What am I missing Thanks Ralph ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390