I tried adding dasd_diag_mod to initrd, but that did not change the dasd to use DIAG (still using FBA). And we set DIAG using YAST. Also, I saw a comment from Mark Post where he suggested that you EXCLUDE the FBA module, but that was not in /etc/sysconfig/kernel in the first place, so we did not pursue that.
Right now we're not sure what's going on. Two of our newly cloned SLES9 servers work and the swap file gets created at boot time. Two don't work...but if we issue /etc/init.d/boot.local start after boot...the VDISK swaps define just fine... This is really strange. Dave On Wed, 16 Feb 2005 20:02:00 -0700, Dave Myers <[EMAIL PROTECTED]> wrote: > I can not get the VDISK SWAP to work at boot time on SLES9. Could it be that the dasd_fba_mod (or dasd_diag_mod) is not in the initrd? You might need to add it in /etc/sysconfig/kernel INITRDMODULES and run mkinitrd and zipl again. Rob -- Rob van der Heij rvdheij @ gmail.com ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the Dave Myers Sirius Enterprise Systems Group Sr. Systems Engineer Office Phone: (303) 996-7112 Cellular Phone: (303) 619-0782 Home Office: (303) 948-0027 Fax: (303) 706.1713 e-mail: [EMAIL PROTECTED] ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
