I'm running SLES8/64bit using k_deflt-2.4.21-251 and vsftpd-1.1.0-21 connected via VSWITCH under zVM 5.1. When I try to initiate an FTP of a 200 MB file, I almost immediately drop my qeth connection. I am running in a 5 GB virtual machine. If I drop down to a 2GB machine, it works ok. Below is the beginning of the sense data which I receive. Are there known problems with running > 2 GB machines that would cause this behavior?
qdio : sense data available on qdio channel. qdio : irb: 04 c2 40 17 00 88 32 60 0e 20 00 00 00 80 00 00 qdio : irb: 03 60 00 41 00 00 00 00 8e 3d 55 00 00 00 00 00 qdio : sense data: 80 00 1f 07 00 00 00 00 00 00 00 00 00 00 00 00 qdio : sense data: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 qdio : received check condition on activate queues on irq 0x6 (cs=x20, ds=xe). qeth: activate queues on irq 0x6: dstat=0xe, cstat=0x20 qeth: recovery was scheduled on irq 0x4 (eth0) with problem 0x3 qeth: sense data available on read channel. qeth: irb: 00 c2 60 17 00 2f 05 d8 0e 00 10 10 00 80 00 00 qeth: irb: 01 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 qeth: sense data: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390