Hello list, Has anyone been able to add a second interface to a RHEL4 system? I am trying to add an eth1. I have a other QDIO triplets defined besides the primary triplet being used by eth0. For example, the VM user ID name TEAMA has virtual device 1600 as the starting device address of a VSWITCH NIC. The kernel recognizes them as they show up as directories under /sys/bus/ccw/drivers/qeth
However, if I echo a "1" to /sys/bus/ccw/drivers/qeth/0.0.1600/online, the value remains 0. Similarly the "chccwdev -e" command fails: # chccwdev -e 0.0.1600 Setting device 0.0.1600 online Failed >From a 3270 session, the following shows the status of the device: #cp q 1600-1602 00: OSA 1600 ON NIC 1600 UNIT 000 SUBCHANNEL = 001 00: 1600 QDIO-ELIGIBLE QIOASSIST-ELIGIBLE 00: OSA 1601 ON NIC 1600 UNIT 001 SUBCHANNEL = 001 00: 1601 QDIO-ELIGIBLE QIOASSIST-ELIGIBLE 00: OSA 1602 ON NIC 1600 UNIT 002 SUBCHANNEL = 001 00: 1602 QDIO-ELIGIBLE QIOASSIST-ELIGIBLE #cp q vswitch vsw1 det ... 00: Adapter Owner: TEAMA NIC: 1600 Name: UNASSIGNED #cp q vswitch vsw1 accesslist ... TEAMA (is in the list) Any help will be appreciated. "Mike MacIsaac" <[EMAIL PROTECTED]> (845) 433-7061 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
