Hi list,
i tried to enable the "VM Shared Kernel Support" in SLES9.
After installation of SLES9 i performed following steps:
cd /usr/sr/linux
make cloneconfig
make menuconfig (to enable VM Shared Kernel Support)
make image
cp image /boot/image-nss
zipl iplnss
After rebooting the system "cat /proc/iomem" show lokks the same as before
...
Here my /proc/iomem, zipl.conf and the /boot
00000000-10000000 : <BAD>
00000000-0031c59b : Kernel code
0031c59c-00466fff : Kernel data
# Modified by YaST2. Last modification on Thu Jun 9 09:01:23 2005
[defaultboot]
default = ipl
[ipl]
target = /boot/zipl
image = /boot/image
ramdisk = /boot/initrd
parameters = "root=/dev/dasdb1 selinux=0 TERM=dumb elevator=cfq"
[iplnss]
target = /boot/zipl
image = /boot/image-nss
parameters = "root=/dev/dasdb1 noinitrd dasd=200-201"
-rw-r--r-- 1 root root 179168 Jul 2 2004 Kerntypes-2.6.5-7.97-s390x
-rw-r--r-- 1 root root 676341 Jul 2 2004 System.map-2.6.5-7.97-s390x
-rw-r--r-- 1 root root 15136 Jul 2 2004 config-2.6.5-7.97-s390x
lrwxrwxrwx 1 root root 22 Jun 9 10:53 image ->
image-2.6.5-7.97-s390x
-rwxr-xr-x 1 root root 4743904 Jul 2 2004 image-2.6.5-7.97-s390x
-rwxr-xr-x 1 root root 3993056 Jun 9 14:40 image-2.6.5-7.97-s390x-nss
lrwxrwxrwx 1 root root 26 Jun 9 12:57 image-nss ->
image-2.6.5-7.97-s390x-nss
lrwxrwxrwx 1 root root 23 Jun 9 11:01 initrd ->
initrd-2.6.5-7.97-s390x
-rw-r--r-- 1 root root 1593205 Jun 9 11:01 initrd-2.6.5-7.97-s390x
-rw-r--r-- 1 root root 39443 Jul 2 2004
symvers-2.6.5-7.97-s390-s390x.gz
-rw-r--r-- 1 root root 1510647 Jul 2 2004 vmlinux-2.6.5-7.97-s390x.gz
drwxr-xr-x 2 root root 72 Jun 9 11:01 zipl
Is the a new HOWTO for kernel 2.6. I just found documentation regarding
2.4.
Any help appreciated
Tobias Doerkes
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
