As Rick pointed out, /proc/cmdline will contain all the stuff directly sent to the kernel. But then, on the mainframe, _you_ have control of what all is in the parmfile, since you create it (or can at least look at it).
I haven't looked yet, but that may not be everything that gets used. You might want to look at the initrd to see if they're doing anything else in there that might invoke kernel modules, etc. Mark Post -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Mark D Pace Sent: Friday, June 24, 2005 1:34 PM To: LINUX-390@VM.MARIST.EDU Subject: Parm file Anyone know where I can find a list of all the parm file parameters used on the initial boot during install? Mark D Pace Senior Systems Engineer Mainline Information Systems 1700 Summit Lake Drive Tallahassee, FL. 32317 Office: 850.219.5184 Fax: 888.221.9862 http://www.mainline.com This e-mail and files transmitted with it are confidential, and are intended solely for the use of the individual or entity to whom this e-mail is addressed. If you are not the intended recipient, or the employee or agent responsible to deliver it to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you are not one of the named recipient(s) or otherwise have reason to believe that you received this message in error, please immediately notify sender by e-mail, and destroy the original message. Thank You. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
