I have successfully installed SUSE 9 SP2 on a 2G LUN - the swap is on VDISK (using SWAPGEN5). At this point all is OK.
I am now trying to add a partition (sdb1) on a 8G LUN. Using YAST I can successfully add the ZFCP device, add the partition and provide a load point. Once I exit YAST I can issue a CD and LS etc - all is OK. However, every time I shutdown and reboot I get the error messages at the bottom. I have tried EXT3 and EXT2. I have also tried accessing the LUN on the same and different channel numbers - nothing seems to work. What am I doing wrong. Thanks. Peter. Checking file systems... fsck 1.36 (05-Feb-2005) Checking all file systems. [/sbin/fsck.ext3 (1) -- /ztpf] fsck.ext3 -a /dev/sdb1 fsck.ext3: No such device or address while trying to open /dev/sdb1 Possibly non-existent or swap device? fsck.ext3 /dev/sdb1 failed (status 0x8). Run manually! ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390