Has anyone recently done a successful SLES9 install under z/VM using non-QDIO OSAs? From z/VM we have connectivity to our Linux install workstation, can FTP files across but when we start the SLES9 install dialog and enter all the networking info it cannot detect the network.
Here is a sequence of events = = =- Welcome to SUSE LINUX Enterprise Server 9 for zSeries -= = = Please select the type of your network device: 0) no network 1) OSA Token Ring (lcs) 2) OSA Ethernet 3) OSA-Gigabit Ethernet or OSA-Express Fast Ethernet 4) Channel To Channel 5) Escon 6) IUCV 8) Hipersockets 9) OSA High speed Token Ring (qdio) MORE... D SEC520 10) Show subchannels and detected devices Enter your choice (0-10): 2 Loading cu3088 module: First 16 possible OSA / OSA-2 channel devices detected: chan_type is a bitfield of: CTC=1 ESCON=2 LCS=0x4 0.0.0a00 3088/60 0.0.0a01 3088/60 Device 0.0.0a00 configured lcs: LCS device eth0 without IPv6 support lcs: LCS device eth0 with Multicast support eth0 detected! MORE... D SEC520 eth0 Link encap:Ethernet HWaddr 00:09:6B:1A:8D:8D BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) eth0 is available, continuing with network setup. : : : Configuration for eth0 will be: Full host name : ZVM52 IP address : 192.168.1.3 MORE... D SEC520 Net mask : 255.255.255.0 Broadcast address: 192.168.1.255 Gateway address : 192.168.1.1 MTU size : 1500 Is this correct (Yes/No) ? Is this correct (Yes/No) ? yes : : : ifconfig eth0 192.168.1.3 netmask 255.255.255.0 broadcast 192.168.1.255 mtu 1500 lcs: LCS:Error in opening device! SIOCSIFFLAGS: Input/output error /sbin/ifconfig eth0 : eth0 Link encap:Ethernet HWaddr 00:09:6B:1A:8D:8D inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) : : : SIOCADDRT: Network is down Network Setup finished, running inetd... : : : : Please specify the installation Source: 1) NFS 2) SAMBA 3) FTP 0) Abort Choice: 1 : : : 192.168.1.120 connect: Network is unreachable Host is not reponding. please enter a new number Do you want to ignore this error and continue anyway? (Yes/No) 192.168.1.120 connect: Network is unreachable Richard W. Lauck Cornerstone Systems, Inc. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390